Growth service lines

Legionella and building water management programs

The plumber's role in Legionella water management programs: which buildings need one, CDC toolkit steps, dead legs, temperatures, flushing and records.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing7 min read

On this page
  1. Why water management is a plumbing opportunity
  2. Which buildings need a program
  3. What a water management program contains
  4. Where the plumber makes the biggest difference
  5. Restarting buildings after shutdowns and renovations
  6. How to offer the service without overpromising
  7. Setting up the service inside your company
  8. Frequently asked questions
  9. References
Growth service lines: Legionella and building water management programsArticle coverGROWTH SERVICE LINESLegionella and buildingwater managementprogramsAva for PlumbersInsightsGrowth service lines: Legionella and building water management programsArticle coverGROWTH SERVICE LINESLegionella andbuilding watermanagement programsAva for Plumbers

Key takeaways

  • CDC says almost all (9 in 10) Legionnaires' outbreaks it investigated were caused by problems preventable with more effective water management[1].
  • Buildings and devices at increased risk should have a water management program based on industry standards[1]; ASHRAE Standard 188 is the one most often used.
  • Legionella grows best from 77 to 113 degrees F in large, complex plumbing systems, so temperature, flow and dead legs are plumbing problems[2].
  • Plumbers add value on the program team: flow diagrams, mixing valves, water heater settings, dead-leg removal, flushing and restart after shutdowns.
  • Never promise a 'Legionella-free' building. Offer clear plumbing scope and leave sampling and disinfection chemistry to qualified partners.

Why water management is a plumbing opportunity

Legionella bacteria live naturally in fresh water, but they become a health problem when they grow and spread in building water systems. CDC says Legionella grows in showerheads, sink faucets, hot tubs and large, complex plumbing systems, at temperatures of 77 to 113 degrees F[2]. About 1 in 10 people who get Legionnaires' disease die from complications[3], and people 50 years or older are among those at increased risk[2].

The key finding for building owners is that most outbreaks were preventable. CDC investigations show that almost all, 9 in 10, outbreaks were caused by problems preventable with more effective water management[1]. That puts the plumbing system, and the people who maintain it, at the center of prevention.

Investigated Legionnaires' outbreaks caused by problems preventable with better water management
Investigated Legionnaires' outbreaks caused by problems preventable with better water managementDonut chart. Preventable with more effective water management (9 in 10): 90%.Preventable with more effective water management (9 in 10): 90%90%
  • Preventable with more effective water management (9 in 10) 90%

Source: Centers for Disease Control and Prevention, 2026[1]

Show the data
ItemValue
Preventable with more effective water management (9 in 10)90%

Which buildings need a program

CDC says buildings and devices at increased risk for Legionella growth and spread should have a water management program, based on industry standards[1]. Its toolkit, written for building owners and managers, explains which buildings and devices need a program and includes a yes-or-no worksheet to decide[4]. The building types that usually answer yes are the ones commercial plumbers already serve.

  • Healthcare facilities where patients stay overnight, and buildings that house or treat people at increased risk, such as senior living and long-term care.
  • Large buildings with complex hot water systems: hotels, apartment towers, dormitories and office towers with recirculating hot water.
  • Buildings with devices that spray or aerosolize water: cooling towers, hot tubs and spas, decorative fountains and some humidifiers.
  • Buildings that have been partly or fully closed, or that have low-use wings, where water sits stagnant.
  • Buildings after major renovation, where new dead legs or changed flow paths are common.

Many owners have never heard of these programs, or they assume the water utility handles it. A short, factual conversation about the CDC worksheet is often enough to open the door.

What a water management program contains

CDC's toolkit walks owners through the parts of a program, and they map closely onto plumbing knowledge. The program team usually includes facility staff, a water treatment specialist, sometimes an infection preventionist and an outside plumbing contractor.

  1. Form the team

    Name who owns the program, who does the work and who can approve changes. The plumbing contractor is often the person who knows the building's piping best.

  2. Describe the water system

    Write a short description and draw a flow diagram from the water entry through treatment, storage, heating, recirculation and out to fixtures and devices.

  3. Find where Legionella could grow and spread

    Mark storage tanks, water heaters, low-flow branches, dead legs, mixing valves, showers, hot tubs, fountains and cooling towers on the diagram.

  4. Set control measures and limits

    Decide what keeps each area safe, such as hot water temperature at the heater and return, disinfectant levels or flushing frequency, and the limits that trigger action.

  5. Plan corrective actions

    Write down what happens when a reading is out of range: who is told, what is adjusted, and when it is rechecked.

  6. Confirm it works

    Review records regularly and confirm the program is being followed and is effective, using the testing approach the team chooses.

  7. Document and communicate

    Keep logs, diagrams and changes in one place, and tell the team about any plumbing change that affects flow or temperature.

Where the plumber makes the biggest difference

Several of the most important control points are physical plumbing conditions that only a plumber can fix. These are also the services you can offer as defined, priced scopes.

Common building water risk points and the plumbing work that addresses them
Risk pointWhat goes wrongPlumbing fix
Dead legsAbandoned branches hold warm, stagnant waterRemove back to the active main; document on the flow diagram
Water heaters and storageLow set points or sediment create growth conditionsSet and record temperatures per the program; flush and service on schedule
Mixing valvesValves set or failing in the growth rangeInstall, test and maintain thermostatic mixing valves where scald control is needed, close to the outlet
RecirculationUnbalanced loops leave branches coldBalance the loop, repair pumps and check return temperatures
Low-use outletsRooms or wings rarely usedSet up a flushing schedule and log, or remove unneeded fixtures
Showerheads and aeratorsBiofilm and scaleClean or replace on a schedule

Hot water temperature deserves care because the scald risk and the Legionella risk pull in opposite directions. The usual answer is to store and circulate water hot enough for the program's control limits and to mix it down near the point of use. The program team, not the plumber alone, should set those limits.

Restarting buildings after shutdowns and renovations

Stagnant water is a recurring trigger. Buildings that close for a season, schools on summer break, and floors left empty during renovation all need a planned restart. Plumbers are well placed to run that work under the program.

  1. Check the building's water management program, or the owner's restart plan, before touching anything.
  2. Flush hot and cold lines systematically from the point of entry outward, so fresh water reaches every outlet.
  3. Drain, clean and refill water heaters and storage tanks as the plan requires, and bring them to set temperature before reopening.
  4. Clean and flush devices such as ice machines, eyewash stations and decorative fountains following their manufacturers' instructions.
  5. Record each step, date and reading so the team can show the restart was completed.

After renovations, walk the area with the facility team and the drawings. New dead legs are common when fixtures are removed or relocated; fixing them before the walls close costs far less than opening them later.

How to offer the service without overpromising

Water management is a team effort, and no plumbing contractor can guarantee a building is free of Legionella. Position your company as the plumbing member of the team with defined scopes, and refer sampling interpretation, disinfection chemistry and cooling tower treatment to qualified specialists.

  • 'We can help you complete CDC's worksheet to see whether your building needs a water management program.'
  • 'We can draw your water system flow diagram and mark dead legs, mixing valves and low-use outlets.'
  • 'We can fix the plumbing conditions your program team identifies, and log every change on the diagram.'
  • 'For water testing and disinfection, we work with a water treatment firm and an accredited lab.'

Example: a fictional commercial plumber is asked to fix a slow hot water problem in a 12-story senior apartment building. While balancing the recirculation loop, the tech finds three capped branches left from an old laundry room. The contractor documents them, removes them back to the main, and offers to help the owner start a water management program using CDC's toolkit, with a water treatment partner handling testing. The building becomes a maintenance account.

This work connects naturally to healthcare plumbing, to facility manager relationships, and to calls after a water main break or boil notice, when flushing and restart procedures matter again.

Setting up the service inside your company

Water management work is recurring, documented and scheduled, which makes it very different from emergency service. Treat it as its own small program with an owner, a price structure and a records system, rather than as a favor your best commercial tech does on the side.

  • Owner: one service manager is responsible for every water management account, the schedule and the records.
  • Training: techs who work on these accounts learn the CDC toolkit, how to read a flow diagram, how to take and log temperatures correctly, and when to stop and call the program team.
  • Tools: calibrated thermometers, data loggers for return-loop temperatures, flushing logs and a camera for before-and-after photos of every change.
  • Scopes: price defined services separately, such as flow diagram preparation, dead-leg removal per branch, mixing valve service per valve, monthly flushing visits per building, and restart after shutdown.
  • Records: keep a building file with the current diagram, every change, every temperature reading your techs take and the date each task was completed.

Agree the boundaries in writing. Your contract should state that the building owner runs the program, that your company performs the plumbing tasks listed, and that sampling results, disinfection and cooling tower treatment belong to the named specialists. That protects your company and makes the owner's responsibilities clear.

Finally, schedule an annual review with each account. Walk the building with the facility manager, compare the flow diagram with what is actually installed, and propose the next year's plumbing work. Those reviews are where small maintenance accounts grow into renovation and replacement projects.

Frequently asked questions

Which buildings need a Legionella water management program?

CDC says buildings and devices at increased risk for Legionella growth and spread should have one[1]. Its toolkit includes a yes-or-no worksheet covering healthcare facilities, large buildings, and devices such as cooling towers, hot tubs and fountains[4].

What temperature does Legionella grow at?

CDC says Legionella grows in building water systems at temperatures of 77 to 113 degrees F[2].

Can a plumber test for Legionella?

A plumber can collect samples if trained and following the lab's procedure, but interpretation and disinfection decisions belong to the program team and qualified specialists.

What standard do water management programs follow?

CDC says programs should be based on industry standards[1]. ASHRAE Standard 188 is the standard most often used for building water systems.

References

  1. Centers for Disease Control and Prevention (2026). About Legionella Control (opens in a new tab) โ†‘

  2. Centers for Disease Control and Prevention (2026). Causes and How Legionella Spreads (opens in a new tab) โ†‘

  3. Centers for Disease Control and Prevention (2026). About Legionnaires' Disease (opens in a new tab) โ†‘

  4. Centers for Disease Control and Prevention (2026). Toolkit: Developing a Legionella Water Management Program (opens in a new tab) โ†‘

Book a demo

See Ava handle your calls.

Book a short demo. Weโ€™ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo