Key takeaways
- A jetter pays off when you regularly see grease, roots and scale that cable machines only punch through, especially in commercial kitchens and older laterals.
- Cart jetters suit residential and light commercial work; trailer and truck units suit long runs, large lines and recurring commercial contracts.
- Count the hidden costs: hoses and nozzles, water supply, winter protection, training, protective equipment and maintenance.
- Run payback on jobs you will really sell, using a loaded labor cost; benefits alone add about 30% to compensation costs on average.
- Pair the jetter with a camera so you can show the before and after, and sell maintenance plans to grease-heavy customers.
What a jetter does that a cable machine doesn't
A cable machine opens a path through a blockage. A hydro jetter scours the pipe wall with high-pressure water, removing grease, scale, sludge and fine roots along the whole run. For a customer with a kitchen line that blocks every few months, that difference is the reason to call you rather than whoever is cheapest. For the shop, it means higher-value drain calls, recurring commercial work and better results before a liner or repair.
Blockages are not just a household nuisance. EPA lists blockages among the main causes of sanitary sewer overflows, which it estimates at 23,000 to 75,000 a year in the US[1]. Restaurants, apartment buildings and older neighborhoods with mature trees produce steady demand for line cleaning that lasts.
Cart, trailer or truck-mounted
| Type | Typical use | Strengths | Limits |
|---|---|---|---|
| Electric cart jetter | Interior lines, small residential drains, indoor commercial work | Compact, quiet, fits through doors, lower purchase cost | Lower flow and pressure; limited on long or large lines |
| Gas cart jetter | Residential laterals and light commercial lines | More power than electric carts; portable | Exhaust means outdoor use only; noise |
| Trailer jetter | Long laterals, larger lines, commercial kitchens, grease and roots | High flow and pressure, onboard water tank, long hose reels | Higher cost, towing, parking and storage, winterizing |
| Truck or van-mounted jetter | High-volume drain companies, municipal and large commercial contracts | Always on the vehicle, fast setup, heated options | Highest cost, ties up a vehicle, specialist service |
Flow matters as much as pressure. A high pressure figure with low flow cleans poorly in larger lines, because flow carries debris away. When comparing units, ask for both figures and for nozzle recommendations for your common line sizes.
Think about where the work happens. Many commercial kitchens and apartment buildings have cleanouts indoors, in basements or behind fixtures, where a gas engine cannot run. An electric cart or a trailer unit with a long hose reel parked outside covers those jobs. If most of your work starts at an outdoor cleanout on a residential lateral, a gas cart is often the most practical first machine. Check the customer access before quoting, so the right unit goes on the right truck.
When a jetter makes sense
- You see repeat drain calls at the same addresses, especially restaurants, apartment buildings and homes with older laterals.
- Camera inspections regularly show grease buildup, scale or fine roots that a cable leaves behind.
- You want to offer line preparation before liners, spot repairs or other trenchless work.
- Commercial customers ask about scheduled maintenance for grease lines.
- You are subcontracting or renting jetting more than a few times a month.
It makes less sense if your drain work is mostly simple residential clogs that a cable clears in one visit, or if you have nobody with the time and interest to own the machine, train others and keep it maintained.
The real cost of ownership
The sticker price is only the start. Budget for the full setup and the running costs before you compare against expected revenue.
- Hoses and nozzles: several nozzle types for grease, roots and general cleaning, plus replacement hose as it wears.
- Water supply: a way to fill the tank or connect to the customer's supply, and backflow protection where required.
- Winter protection: antifreeze procedures or heated storage, since a frozen pump can be an expensive repair.
- Training and protective equipment: gloves, eye and face protection, waterproof clothing and foot controls.
- Maintenance: pump oil, filters, engine service on gas units, and annual service from the dealer.
- Towing and storage for trailers: hitch, registration, insurance and a place to park it.
- Tech time: jetting jobs often take longer than cable jobs, so price them accordingly.
Worked payback example
Start with labor, because it is the largest cost of every jetting job. Average hourly earnings at plumbing, heating and AC contractors were $42.38 in September 2026[2], and benefits averaged 30% of total compensation across private industry, with wages making up the other 70%[3]. Add payroll taxes, workers' compensation and vehicle time to get your loaded cost.
- Wages and salaries 70%
- Benefits 30%
Source: U.S. Bureau of Labor Statistics, 2026[3]
Show the data
| Item | Value |
|---|---|
| Wages and salaries | 70% |
| Benefits | 30% |
Example: a fictional six-truck shop compares a gas cart jetter at $8,000 with a trailer jetter at $45,000. Its loaded labor cost is $65 an hour. For the cart, it expects 12 residential jetting jobs a month at $450, each taking two hours; monthly contribution is $5,400 minus $1,560 of labor and $300 for nozzles, hose wear and service, or about $3,540, for payback in under three months. For the trailer, it expects six commercial grease-line jobs a month at $900, each taking three hours, plus four maintenance-plan visits at $600 taking two hours; monthly revenue is $7,800, labor is $1,690, and upkeep, towing and insurance are about $900, leaving about $5,210 and a payback of roughly nine months. The cart wins on speed of payback; the trailer wins only if the commercial demand is real and repeatable.
Test demand before buying the bigger unit: rent or subcontract trailer jetting for three months and record how many jobs you sell and at what price.
Rent, subcontract or buy
There is a middle path between owning nothing and buying a trailer. Many supply houses and rental yards rent cart jetters by the day, and specialist drain companies will jet lines for you on a subcontract. Both let you serve customers now and collect real data on demand before committing.
- Rent when jetting is occasional, a few jobs a month at most, and the rental location is close enough to collect the machine without losing half a day.
- Subcontract when the work needs equipment or experience you do not have, such as large commercial lines, and you want to keep the customer relationship.
- Buy a cart unit when rental and subcontract costs are adding up every month and techs are asking for it.
- Buy a trailer or truck unit only when you have a steady base of commercial work, a person to own the machine and somewhere to store it safely.
Questions to ask the dealer
- What flow and pressure does the unit deliver at the nozzle with my common hose lengths, not just at the pump?
- Which nozzles do you recommend for grease, roots and general cleaning in 2, 4 and 6 inch lines?
- What training is included, and can you train my techs on a real job?
- What does annual service involve, how long does it take and is a loaner available?
- How should the unit be winterized, and what does a frozen pump repair usually involve?
- What warranty covers the pump and engine, and what voids it?
Safety comes first
Jetters work at pressures that can cause serious injection injuries, and the hose can whip if a nozzle exits a cleanout under pressure. Specialty trade contractors recorded 2.3 recordable injury and illness cases per 100 full-time workers in 2024[4]; a jetter adds a new hazard to that baseline, so treat training as part of the purchase.
Train before first use
Have the dealer train every operator on setup, nozzle selection, pressure control and emergency shutoff.
Mark the hose
Use a hose marker or tape near the nozzle so the operator knows when the nozzle is close to the cleanout, and stop pressure before it comes out.
Wear protection
Use gloves, eye and face protection and waterproof clothing, and keep bystanders away from the cleanout.
Use a foot control
Foot pedals or dead-man controls let the operator stop flow instantly with hands on the hose.
Inspect every time
Check hoses and fittings for wear and damage before each job, and retire damaged hose.
Build the service line around it
- Inspect with a camera before and after jetting, and send the customer both videos.
- Offer quarterly or monthly grease-line maintenance to restaurants and commercial kitchens, priced as a plan.
- Train CSRs to ask repeat drain callers whether the line has been jetted before, and to offer a camera inspection.
- Use jetting as preparation for lining and spot repairs, and quote both together.
- Track jetting jobs, repeat calls and plan renewals monthly to see whether the machine is paying its way.
For the camera side, see buying sewer camera equipment, and for adding drain work as a department, adding a drain cleaning department. The receipts benchmark is useful too: plumbing, heating and AC contractors generated about $260,000 in receipts per employee in 2022[5], so a machine that lifts a tech's billable output moves the whole business.
Frequently asked questions
Is a hydro jetter worth it for a small plumbing shop?
A cart jetter often pays back quickly if you see repeat grease and root problems. A trailer jetter is worth it only if you have steady commercial or long-line work; test demand by renting or subcontracting first.
Cart jetter or trailer jetter?
Cart jetters suit interior and residential lines and fit through doors. Trailer jetters have more flow and pressure for long laterals, larger lines and commercial grease work, but cost more to buy, tow and maintain.
Does jetting damage pipes?
Used correctly on sound pipe, jetting cleans without damage. Inspect with a camera first; old, cracked or collapsed pipe needs a different approach, and the operator should adjust pressure and nozzles to the pipe.
How should jetting be priced?
Price from your loaded labor cost and the time jetting jobs actually take, plus equipment upkeep, rather than matching cable-clearing prices.
References
U.S. Environmental Protection Agency (2026). Sanitary Sewer Overflows (SSOs) (opens in a new tab) โ
U.S. Bureau of Labor Statistics, Current Employment Statistics (2026). Average hourly earnings of all employees, plumbing, heating, and air-conditioning contractors (CEU2023822003) (opens in a new tab) โ
U.S. Bureau of Labor Statistics (2026). Employer Costs for Employee Compensation - June 2026 (opens in a new tab) โ
U.S. Bureau of Labor Statistics (2024). Industries at a Glance: Specialty Trade Contractors (NAICS 238) (opens in a new tab) โ
U.S. Census Bureau (2022). Statistics of U.S. Businesses 2022: U.S. and states, 6-digit NAICS (opens in a new tab) โ