Reviews customer experience

Calculating customer lifetime value for a plumbing shop

Calculate customer lifetime value for a plumbing shop with a worked example: invoice inputs, the margin formula, replacement cycles and how to use it.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing6 min read

On this page
  1. Why CLV matters to a plumbing shop
  2. Three versions of the formula
  3. Gathering the inputs
  4. A worked example
  5. Replacement cycles change the picture
  6. Calculate by segment
  7. Using CLV in decisions
  8. Ways to raise CLV
  9. Sense-check the result
  10. Pitfalls to avoid
  11. Example: two segments compared
  12. Frequently asked questions
  13. References
Reviews customer experience: Calculating customer lifetime value for a plumbing shopArticle coverREVIEWS CUSTOMER EXPERIENCECalculating customerlifetime value for aplumbing shopAva for PlumbersInsightsReviews customer experience: Calculating customer lifetime value for a plumbing shopArticle coverREVIEWS CUSTOMER EXPERIENCECalculating customerlifetime value for aplumbing shopAva for Plumbers

Key takeaways

  • Customer lifetime value (CLV) is the gross profit a typical customer brings over the years they stay with you.
  • Use margin, not revenue: CLV = average gross profit per job ร— jobs per year ร— expected years as a customer.
  • Big-ticket cycles matter. Most storage water heaters last 10โ€“15 years, so a long-term customer is likely to need at least one replacement[1].
  • CLV tells you what you can afford to spend to win and keep a customer, and how generous service recovery can be.
  • Calculate it by segment: homeowners, landlords and property managers behave very differently.

Why CLV matters to a plumbing shop

Most plumbing marketing decisions are made on the first job: what a lead costs and what the first invoice was worth. That undervalues customers who come back. A homeowner whose first call is a small drain job may later need a water heater, a repipe and a remodel rough-in, and refer a neighbor or two. CLV puts a number on that, so you can make better decisions about ad budgets, service recovery and follow-up.

The idea is borrowed from industries with long customer relationships. In one widely cited Bain & Company article, Fred Reichheld noted that in financial services, a 5% increase in customer retention produced more than a 25% increase in profit, because returning customers buy more and cost less to serve[2]. CLV is how you translate that logic into your own numbers.

Three versions of the formula

  • Revenue CLV: average invoice ร— jobs per year ร— years as a customer. Easy, but it overstates value because it ignores costs.
  • Margin CLV: average gross profit per job ร— jobs per year ร— years as a customer. Gross profit is revenue minus direct labor, parts and materials for the job. This is the version to use for decisions.
  • Net CLV: margin CLV minus the cost of acquiring the customer. Useful for judging a marketing channel.

You can refine it with a discount rate for future years or a retention curve, but for a small or mid-size shop the simple margin version, done honestly, is enough to change decisions.

Write the formula at the top of the spreadsheet and keep it. The value of CLV comes from tracking the same calculation every year, not from precision.

Gathering the inputs

  1. Export three years of invoices

    From your field service or accounting software, with customer ID, date, amount and job type.

  2. Group by customer

    Match repeat customers by phone number and address, not just name. Merge duplicates.

  3. Find the average invoice

    Total revenue divided by number of jobs, by segment if you can.

  4. Work out jobs per year

    For customers active at least two years, average jobs per year.

  5. Estimate years as a customer

    Use the share of customers who return within 24 months to estimate typical tenure, or start with a conservative assumption and revise it.

  6. Estimate gross margin

    Revenue minus direct labor, parts and materials, as a share of revenue. Your accountant can help.

Labor is the largest cost to get right. For plumbing, heating and AC contractors as a whole, payroll equalled about 27% of receipts in 2022[3], but that includes office and management staff. Use your own direct labor cost per job, not an industry average.

A worked example

Example (fictional): a five-truck residential shop runs the numbers. These figures are illustrative, not benchmarks.

Example inputs for one customer segment. Replace with your own data.
InputExample valueWhere it came from
Average invoice, service calls$420Three years of invoices, excluding installs
Gross margin on service calls50%Revenue minus direct labor, parts and materials
Average gross profit per service job$210$420 ร— 50%
Service jobs per year per active customer0.8Customers active two or more years
Expected years as a customer7Conservative estimate from return rates
Water heater replacements over that tenure0.5 per customerShare of customers likely to need one in seven years
Gross profit per water heater replacement$900Install invoices minus direct costs

Example calculation: service gross profit is $210 ร— 0.8 jobs ร— 7 years, or about $1,176. Add the expected water heater profit of 0.5 ร— $900, or $450. Margin CLV is about $1,626 per customer. If this shopโ€™s average cost to win a new customer from paid search is $180, net CLV is about $1,446.

In this example the first job alone, at $210 gross profit, barely covers the acquisition cost. The customer becomes profitable through return visits and the eventual replacement. That is why the shop invests in follow-up and reminders, not just ads.

Replacement cycles change the picture

The big-ticket jobs that make CLV interesting follow equipment lifespans. Most storage water heaters last 10โ€“15 years, while tankless units can last more than 20[1]. Smaller wear items cycle faster: EPA advises replacing toilet flappers at least every five years[4].

Typical water heater lifespansU.S. Department of Energy, Energy Saver Guide
Typical water heater lifespansBar chart. Storage water heater, low end: 10 years; Storage water heater, high end: 15 years; Tankless water heater (can last more than): 20 years.Storage water heater, low endStorage water heater, low end: 10 years10 yearsStorage water heater, high endStorage water heater, high end: 15 years15 yearsTankless water heater (can last more than)Tankless water heater (can last more than): 20 years20 yearsTypical water heater lifespansBar chart. Storage water heater, low end: 10 years; Storage water heater, high end: 15 years; Tankless water heater (can last more than): 20 years.Storage water heater, low endStorage water heater, low end: 10 years10 yearsStorage water heater, high endStorage water heater, high end: 15 years15 yearsTankless water heater (can last morethan)Tankless water heater (can last more than): 20 years20 years

Source: U.S. Department of Energy, 2022[1]

Show the data
ItemValue
Storage water heater, low end10 years
Storage water heater, high end15 years
Tankless water heater (can last more than)20 years

Record equipment ages on every visit. A customer whose water heater is eleven years old has a very different expected value over the next three years from one whose heater you installed last spring. That data also feeds useful reminders, as described in keeping customers coming back.

10โ€“15 years

typical life of a storage water heater, per the Department of Energy[1]

Calculate by segment

  • Homeowners with service calls only: lower jobs per year, long tenure, occasional big-ticket work.
  • Homeowners who started with an install: often higher CLV because you know the system and the equipment age.
  • Landlords with a few rentals: more jobs per year, price-sensitive, tenure tied to how long they hold the properties.
  • Property managers and commercial accounts: many jobs per year, but CLV depends on keeping the account through staff changes.
  • Membership plan customers: track separately; compare CLV with similar non-members before claiming the plan works.

A single company-wide CLV hides these differences. Even two segments, residential and property management, will tell you more than one blended number.

Using CLV in decisions

Use CLV as a guide for decisions, not as a forecast.
DecisionHow CLV helpsExample rule
Marketing budgetSets the ceiling for cost to win a customerKeep cost per new customer well below one year of gross profit
Service recoveryShows what a lost customer really costsA waived fee is small next to a lost CLV
Follow-up effortJustifies reminders and thank-you textsSpend a few minutes per job on follow-up
Membership plansTests whether members are worth moreCompare CLV of members and similar non-members
Answering coverageValues calls from past customersCover evenings if past customers call then

CLV pairs naturally with cost per job. Track what each marketing channel costs per booked job that actually runs, not per lead, and compare it with the first-year gross profit of the customers that channel brings. A channel that brings fewer but longer-staying customers can be worth more than a cheaper one that brings one-off price shoppers.

Ways to raise CLV

  1. Answer every call, especially from past customers, so repeat work does not leak to competitors.
  2. Follow up every job with a thank-you text from your business number.
  3. Record equipment ages and remind customers before failures become emergencies.
  4. Offer genuine options at every visit, including planned replacements.
  5. Handle problems quickly and fairly; a recovered customer keeps their CLV.
  6. Keep job sites clean and homes protected, which shapes whether customers want you back.

Sense-check the result

Before using CLV in decisions, test it against what you know. Pick ten long-standing customers you remember well and add up their actual gross profit over the years. If the formula says the average customer is worth three times what your best customers have actually produced, an input is wrong, usually tenure or jobs per year. If it comes out far lower, check whether repeat customers were split into duplicate records.

Also run the calculation with a cautious version of each input: a shorter tenure, a lower margin, fewer replacements. If a decision still makes sense with the cautious numbers, it is a safe decision. If it only works with the optimistic ones, treat it as a test rather than a commitment.

Pitfalls to avoid

  • Using revenue instead of gross profit, which makes every customer look more valuable than they are.
  • Assuming a long tenure without evidence. Start conservative and revise as data builds.
  • Counting duplicate customer records as separate people, which understates repeat business.
  • Treating CLV as a target for upselling. Customers notice pressure, and it shortens tenure.
  • Ignoring household budgets. Household operations spending averaged $2,034 per consumer unit in 2025, so most customers are spending carefully on upkeep[5].

Example: two segments compared

Example (fictional): the same shop splits its customers into homeowners and small landlords. Landlords book about three service jobs a year at a lower margin and stay about four years; homeowners book less than one a year but stay longer and buy more water heaters. In this example their margin CLVs come out close, but landlords cost far less to acquire because they come through referrals.

The owner decides to build a simple landlord account process, with a named contact and monthly statements, rather than raising the search ad budget. A year later the calculation is repeated with fresh invoices. See also clean job site standards and protecting customer homes.

Frequently asked questions

How do you calculate customer lifetime value for a plumbing business?

Multiply average gross profit per job by jobs per year and by expected years as a customer. Subtract acquisition cost for net CLV.

Should CLV use revenue or profit?

Use gross profit. Revenue-based CLV overstates value because it ignores labor, parts and materials.

How often should I recalculate CLV?

Once a year, using the same method, so changes reflect the business rather than the formula.

References

  1. U.S. Department of Energy (2022). Energy Saver Guide: Tips on Saving Money and Energy in Your Home (opens in a new tab) โ†‘

  2. Bain & Company (2001). Prescription for cutting costs (Fred Reichheld) (opens in a new tab) โ†‘

  3. U.S. Census Bureau (2022). Statistics of U.S. Businesses 2022: U.S. and states, 6-digit NAICS (opens in a new tab) โ†‘

  4. U.S. Environmental Protection Agency, WaterSense (2026). Fix a Leak Week (opens in a new tab) โ†‘

  5. U.S. Bureau of Labor Statistics (2025). Consumer Expenditures - 2025 (opens in a new tab) โ†‘

Book a demo

See Ava handle your calls.

Book a short demo. Weโ€™ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo