Marketing leads

Cost per lead vs cost per booked job for plumbers

Why cost per lead misleads plumbing owners: formulas for cost per booked job and gross-profit return, hidden office costs and decision rules.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing7 min read

On this page
  1. Why cost per lead misleads
  2. The funnel in six numbers
  3. The formulas
  4. Where cost per lead is still useful
  5. Count the hidden costs
  6. Worked example: two channels, one month
  7. Why margin belongs in the comparison
  8. Set your maximum cost per booked job
  9. Traps in the math
  10. When a higher cost per job is fine
  11. Lifetime value changes the answer
  12. Decision rules that keep budgets honest
  13. Put it on one page for the owner
  14. Frequently asked questions
  15. References
Marketing leads: Cost per lead vs cost per booked job for plumbersArticle coverMARKETING LEADSCost per lead vs costper booked job forplumbersAva for PlumbersInsightsMarketing leads: Cost per lead vs cost per booked job for plumbersArticle coverMARKETING LEADSCost per lead vs costper booked job forplumbersAva for Plumbers

Key takeaways

  • Cost per lead ignores leads you never reach or book; cost per booked job and cost per completed invoice do not.
  • Add the office time spent handling leads; a customer service representative's median pay is $21.53 an hour[1].
  • Judge channels on gross profit per marketing dollar, not revenue, because labor alone takes a large share of receipts[2].
  • Set a maximum cost per booked job from your own average invoice and margin, then cut channels above it.

Why cost per lead misleads

Cost per lead is the number every vendor wants you to compare, because it is easy to make look good. A lead is anything the vendor counts: a form, a call that lasted a few seconds, a shared request sent to several plumbers at once. None of those is a job. A channel can have the cheapest leads in town and still be your most expensive way to win work if few leads answer, fewer book and the jobs are small.

The fix is to measure further down the funnel. Cost per booked job tells you what it costs to put a truck in a driveway. Cost per completed invoice tells you what it costs to get paid. Gross profit per marketing dollar tells you whether the channel makes money after labor and materials.

The funnel in six numbers

  1. Spend: everything the channel costs in the period, including fees, tracking numbers and agency time.
  2. Leads: what the channel delivered or what your tracking recorded.
  3. Reached: leads you actually spoke or texted with.
  4. Booked: appointments set from those conversations.
  5. Completed: booked jobs that were done and invoiced.
  6. Gross profit: invoice revenue minus direct labor, materials and other job costs.

Collect these six numbers per channel every month. If you cannot get one of them, that gap is the first thing to fix, usually by making lead source mandatory on every job as described in tracking which marketing books jobs.

The formulas

Marketing funnel formulas for a plumbing company
MetricFormulaWhat it tells you
Cost per leadSpend divided by leadsHow cheap the top of the funnel is
Contact rateReached divided by leadsLead quality and your speed to respond
Booking rateBooked divided by reachedHow well your team converts conversations
Cost per booked jobSpend divided by bookedWhat it costs to put a truck in a driveway
Cost per completed jobSpend divided by completedWhat it costs to get paid
Return on ad spendRevenue divided by spendRevenue per marketing dollar
Gross profit returnGross profit divided by spendProfit per marketing dollar, the number that pays the bills

Where cost per lead is still useful

Cost per lead is not useless; it is just early. Inside a single channel it is a fast signal that something changed. If cost per lead on your search ads doubles in a week, a competitor may have raised bids, a keyword may have broken, or the landing page may be down. Use it as a smoke alarm for each channel, then make budget decisions on the numbers further down the funnel. The mistake is comparing cost per lead across channels that define a lead differently, such as a shared form lead against a live inbound call.

Count the hidden costs

Spend is not just the invoice from the vendor. Every lead takes office time: answering, calling back, qualifying, disputing junk leads and entering data. The Bureau of Labor Statistics puts the median pay for customer service representatives at $44,770 a year, or $21.53 an hour, in 2025[1], before benefits and payroll taxes. A channel that delivers many poor leads can quietly absorb hours each week.

Estimate office minutes per lead for each channel for a couple of weeks, multiply by your loaded hourly cost and add it to spend. Shared lead platforms and broad social lead forms often look much worse after this step; referrals and repeat customers look even better.

Worked example: two channels, one month

Example (fictional): Channel A, a shared lead service, costs $1,800 for 60 leads, so $30 per lead. The office reaches 33, books 12 and completes 10 jobs worth $3,800 in revenue and $1,710 in gross profit. Office time adds about $260. Cost per booked job is about $172 and gross profit return is 0.83, meaning each marketing dollar returned 83 cents of gross profit. Channel B, search ads to a landing page, costs $3,000 for 40 calls and forms, so $75 per lead. The office reaches 36, books 22 and completes 20 jobs worth $11,600 in revenue and $5,220 in gross profit. Office time adds about $170. Cost per booked job is about $144 and gross profit return is 1.65.

Channel A has leads at less than half the price, yet loses money on gross profit while Channel B more than pays for itself. Any decision made on cost per lead would have moved budget in exactly the wrong direction.

Why margin belongs in the comparison

Revenue overstates what a channel earns, because labor takes a large share of every invoice. Across plumbing, heating and air-conditioning contractors, payroll equalled about 27% of receipts in 2022[2], and average annual payroll per employee was about $73,700 in 2023[3]. Labor costs keep rising: average hourly earnings in the industry were up about 4.4% in September 2026 compared with a year earlier[4].

Payroll as a share of receipts at plumbing, heating and AC contractors, 2022
Payroll as a share of receipts at plumbing, heating and AC contractors, 2022Donut chart. Payroll: 26.9%.Payroll: 26.9%26.9%
  • Payroll 26.9%

Source: U.S. Census Bureau, 2022[2]

Show the data
ItemValue
Payroll26.9%

Your own margin will differ by job type. Drain cleaning and service calls often carry different margins from water heater replacements or repipes. If you can, calculate gross profit return by job type within each channel, because a channel that brings mostly low-margin calls may still look fine on revenue.

Set your maximum cost per booked job

  1. Find the average completed invoice

    Use the last twelve months for new customers only, by channel if possible.

  2. Apply your gross margin

    Multiply the average invoice by your gross margin after labor, materials and job costs.

  3. Adjust for completion rate

    Multiply by the share of booked jobs that are completed and paid.

  4. Decide your marketing share

    Choose what share of that gross profit you are willing to spend to win the job, leaving room for overhead and profit.

  5. Use the result as a ceiling

    Channels above the ceiling for two or three months get fixed or cut.

Example (fictional): average new-customer invoice $520, gross margin 48%, completion rate 90%. Gross profit per booked job is about $225. If the owner is willing to spend up to 40% of that to win a new customer, the ceiling is about $90 per booked job.

Traps in the math

  • Counting repeat customers who happened to click an ad as new customers won by that ad.
  • Leaving out credits and refunds from lead vendors, or counting them twice.
  • Using booked jobs from one month against spend from another when leads take weeks to close, as large replacements often do.
  • Mixing commercial and residential jobs, which have very different invoice sizes.
  • Ignoring cancellations and no-shows, which make booked jobs look better than completed ones.
  • Forgetting that one large repipe can make a small channel look brilliant for a month.

For large, slow-closing work such as repipes or sewer replacements, use a rolling three-month view so a single job does not swing the decision.

When a higher cost per job is fine

Some channels deserve a higher ceiling. Leads that tend to become maintenance plan members, commercial accounts or high-value replacements can justify more spend per booked job. So can channels that keep techs busy in a slow season, when an idle truck costs you wages anyway. Write those exceptions down with a reason and a review date, so a higher ceiling stays a decision rather than a habit.

Lifetime value changes the answer

A first job is often not the last. Customers who join a maintenance plan, call again for a water heater or refer neighbors are worth far more than their first invoice. If you can measure repeat revenue by original source, channels that bring loyal homeowners may justify a higher cost per booked job than channels that bring one-off price shoppers. Start simple: tag the original source on the customer, not just the job, and look at total revenue per customer by source after a year.

Decision rules that keep budgets honest

  • Never cut or grow a channel on cost per lead alone.
  • Give new channels at least a full quarter before judging them.
  • If contact rate is low, fix speed and coverage before blaming the leads.
  • If booking rate is low, listen to calls before changing the ads.
  • Move budget toward the channel with the best gross profit return, in small steps, and recheck.
  • Report referrals and repeat customers alongside paid channels so their value stays visible.

Put it on one page for the owner

Finance and office managers often do this work for an owner who has little time. Keep the monthly report to one page: a row per channel with spend, booked jobs, completed jobs, revenue, gross profit, cost per booked job and gross profit return, plus the same month last year. Add three sentences at the bottom: what improved, what got worse and the one change you recommend. Owners act on short, consistent reports; a long spreadsheet that changes format every month gets ignored.

Frequently asked questions

What is a good cost per booked job for a plumber?

It depends on your average invoice, margin and completion rate. Work out a ceiling from your own numbers, then compare each channel against it.

Why is cost per lead a bad metric?

It ignores leads you never reach, book or complete. Cheap leads can produce expensive jobs.

What is the difference between ROAS and gross profit return?

Return on ad spend uses revenue. Gross profit return subtracts labor, materials and job costs first, so it shows whether the channel really makes money.

Should I include staff time in marketing cost?

Yes. Office time spent answering, calling back and qualifying leads is a real cost and can change which channel looks best.

References

  1. U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Customer Service Representatives (opens in a new tab) โ†‘

  2. U.S. Census Bureau (2022). Statistics of U.S. Businesses 2022: U.S. and states, 6-digit NAICS (opens in a new tab) โ†‘

  3. U.S. Census Bureau (2023). County Business Patterns 2023, U.S. national file (cbp23us) (opens in a new tab) โ†‘

  4. U.S. Bureau of Labor Statistics, Current Employment Statistics (2026). Average hourly earnings of all employees, plumbing, heating, and air-conditioning contractors, not seasonally adjusted (CEU2023822003) (opens in a new tab) โ†‘

Book a demo

See Ava handle your calls.

Book a short demo. Weโ€™ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo