Key takeaways
- A capability statement is a one- or two-page summary that lets a facility buyer decide quickly whether to invite you to bid.
- Lead with what buyers check first: coverage and response times, licenses, insurance, safety record and compliance programs.
- List your NAICS code; for plumbing it is 238220, with an SBA small business size standard of $19.0 million in receipts[1].
- Show water safety know-how: CDC says Legionella grows in building water systems at 77 to 113 degrees F[2].
What a capability statement is for
Commercial buyers do not read websites the way homeowners do. A facility manager at a hospital, a procurement officer at a school district or a general contractor building a mid-rise needs to know in a minute whether you can do their work, safely, at their scale. A capability statement answers that question on one or two pages. It travels as a PDF attached to emails, sits in vendor files, gets printed for meetings and is handed out at pre-bid conferences and industry events.
It is not a brochure. Brochures sell benefits to consumers. A capability statement documents facts: what you do, where, with what credentials, for whom, and how to reach you. Buyers use it to shortlist vendors, so anything that makes them hunt for information makes it less likely you are called.
What facility buyers check first
- Coverage and response: the area you serve and how fast you respond to emergencies, day and night.
- Licenses: master plumber license numbers, specialty certifications such as backflow testing or medical gas, and the states where you hold them.
- Insurance: general liability, workers' compensation, auto and umbrella limits, and willingness to name the client as additional insured.
- Safety record: your recordable incident rate and experience modification rate, with your safety program in one line.
- Compliance programs: backflow testing, water heater and boiler maintenance, and water management support for Legionella risk.
- Capacity: number of licensed plumbers, service trucks, after-hours crews and any prefabrication shop.
- References: similar facilities you have served, with permission to list them.
Safety numbers matter because buyers compare them against the trade. Specialty trade contractors had 2.3 total recordable injury and illness cases per 100 full-time workers in 2024[3]. If your rate is better, state it with the year; if it is worse, show what you have changed.
Water safety is a selling point
For hospitals, senior living, hotels and large office buildings, water safety is a board-level concern. CDC says Legionella bacteria grow in building water systems such as showerheads, sink faucets, hot tubs and large, complex plumbing systems at temperatures of 77 to 113 degrees F[2]. The stakes are high: about 1 in 10 people who get Legionnaires' disease die from complications, and about 1 in 4 who get it during a healthcare facility stay die[4].
Source: Centers for Disease Control and Prevention, 2026[4]
Show the data
| Item | Value |
|---|---|
| All cases (about 1 in 10) | 10% |
| Cases acquired during a healthcare facility stay (about 1 in 4) | 25% |
A contractor who can support a facility's water management program, for example by maintaining mixing valves and water heaters, flushing low-use outlets, documenting temperatures and working with the facility's water management team, offers something many competitors do not. Say so clearly, but only claim services you actually deliver and are trained for.
The template, section by section
| Section | What to include | Example (fictional) |
|---|---|---|
| Header | Company name, logo, one-line description, phone, email, website | Harbor Mechanical Plumbing: commercial service and construction plumbing |
| Company data | Legal name, year founded, NAICS codes, Unique Entity ID if registered in SAM.gov, license numbers, bonding capacity | NAICS 238220; Master Plumber Lic. 00000 |
| Core competencies | Five to eight specific services, each in one line | Domestic water repiping in occupied buildings; backflow testing and repair |
| Differentiators | Three proof-based reasons to choose you | Two-hour emergency response within the metro area, around the clock |
| Past performance | Three to five projects or contracts with client type, scope, size and dates | Senior living campus, 180 units, domestic hot water replacement |
| Safety and compliance | Incident rate, experience modifier, safety program, certifications | Recordable rate and EMR with the year |
| Insurance | Coverage types and limits | General liability, auto, umbrella, workers' compensation |
| Contact | Named person for commercial work, direct phone and email | Commercial manager with a direct line |
Codes and identifiers that open doors
Public buyers and many large private ones sort vendors by classification codes. The main NAICS code for plumbing contractors is 238220, Plumbing, Heating, and Air-Conditioning Contractors. For federal small business programs, SBA sets the size standard for that code at $19.0 million in annual receipts; by comparison, commercial and institutional building construction, NAICS 236220, has a $45.0 million standard[1]. List every code that fits your work, any small business or other certifications you hold, and your Unique Entity ID if you are registered to bid on federal work.
Write competencies that convince
Generic competencies such as commercial plumbing or quality workmanship do nothing. Buyers want specifics they can match to their needs.
- Name the system and the setting: domestic water repiping in occupied healthcare buildings, not repiping.
- Include the scale: buildings up to a given height, a number of units or a pipe size range.
- Mention the method where it matters: infection control risk assessment procedures, after-hours work, phased shutdowns.
- Add the credential: certified backflow testers on staff, medical gas certification, confined space training.
- Keep each line short enough to scan.
Differentiators are proof, not adjectives
Every contractor claims to be reliable, responsive and experienced. Buyers skip those words. Replace each adjective with something a buyer can check: a stated emergency response time for a defined area, the number of licensed plumbers on staff, a named service for after-hours shutdowns, a dedicated commercial dispatcher, digital service reports with photos sent the same day, or a backflow testing program that tracks every device and due date for the client. Three such points, each one line, are enough. If you cannot prove a claim, leave it out.
Past performance is your strongest page
For each project, give the client type, the scope in one sentence, the size or value range, the dates and a contact if the client agrees. Choose projects similar to the work the buyer is likely to offer. Three relevant projects beat ten unrelated ones. If you are new to commercial work, list relevant residential or subcontract work honestly and say what you are qualified for now; never present someone else's project as yours.
Example past performance entry (fictional): Regional hospital, 2025. Replaced domestic hot water mixing valves on four floors in occupied patient areas, with phased shutdowns, infection control containment and temperature documentation for the facility's water management team. Completed over six weekends with no unplanned outages.
Tailor it for each buyer
Keep a master version
Maintain one complete statement with every competency, project and credential.
Read the buyer's needs
Check the facility type, any open bid documents and what their vendor forms ask for.
Reorder, do not rewrite
Move the most relevant competencies and projects to the top for that buyer.
Cut to fit
Keep the tailored version to one page if possible, two at most.
Name the file clearly
Use your company name, capability statement and the buyer type in the file name, and save as PDF.
Common mistakes
- Writing paragraphs of marketing copy instead of scannable facts.
- Missing license numbers, insurance limits or a named contact.
- Listing every service you have ever done rather than what this buyer needs.
- Claiming capabilities you would have to subcontract without saying so.
- Out-of-date safety figures or expired certifications.
- A design that prints badly in black and white or is unreadable on a phone.
Design and format
- Use your brand colors and logo, but keep the layout plain: two columns, clear headings and plenty of white space.
- Put contact details at the top and bottom of every page.
- Use real photos of your crews and projects, with permission, rather than stock images.
- Make sure the PDF is small enough to email and text is selectable, so procurement teams can copy details into their systems.
- Print a test copy in black and white to check it still reads well.
A cover email that gets it opened
A capability statement usually arrives attached to a short email. Keep it to a few sentences and make it specific to the recipient.
Example email (fictional): Subject: Plumbing service for Lakeside Senior Living. Hello Ms. Ortiz, I lead commercial service at Harbor Mechanical Plumbing. We support water heater and mixing valve maintenance, backflow testing and emergency repairs for senior living and healthcare buildings across the county, with licensed plumbers on call around the clock. Our one-page capability statement is attached. Would a 15-minute call next week be useful to understand your current vendor setup? Best regards, Sam Lee, Commercial Manager, direct line 555-0170.
Follow up once after a week or two, then add the contact to a quarterly check-in list. Many commercial relationships start when an incumbent vendor lets the facility down, so being remembered at that moment is the goal.
Where to use it
Attach the statement to introduction emails to facility managers and general contractors, bring printed copies to pre-bid meetings and trade association events, upload it to vendor portals and supplier registration forms, and link it from a commercial page on your website. Update it at least twice a year and after every significant project. The commercial market includes very large competitors: the 338 plumbing, heating and air-conditioning firms with receipts of $100 million or more earned about 27% of industry receipts in 2022[5]. A clear, specific statement is one of the few tools that lets a smaller contractor look as organized as they are.
Frequently asked questions
What is a capability statement for a plumbing contractor?
A one- or two-page document summarizing your services, credentials, safety record, past performance and contact details for commercial and public buyers.
What NAICS code do plumbers use?
The main code is 238220, Plumbing, Heating, and Air-Conditioning Contractors. SBA's small business size standard for it is $19.0 million in annual receipts.
How long should a capability statement be?
One page is ideal and two is the maximum. Keep a longer master version and tailor a short one for each buyer.
What do facility managers want to see?
Coverage and response times, licenses, insurance, safety record, compliance programs such as backflow and water safety, and similar past work.
References
Legal Information Institute, Cornell Law School (Code of Federal Regulations) (2026). 13 CFR ยง 121.201 - What size standards has SBA identified by North American Industry Classification System codes? (opens in a new tab) โ
Centers for Disease Control and Prevention (2026). Causes and How Legionella Spreads (opens in a new tab) โ
U.S. Bureau of Labor Statistics (2024). Industries at a Glance: Specialty Trade Contractors (NAICS 238) (opens in a new tab) โ
Centers for Disease Control and Prevention (2026). About Legionnaires' Disease (opens in a new tab) โ
U.S. Census Bureau (2022). Statistics of U.S. Businesses 2022: Firms by industry and enterprise receipts size (opens in a new tab) โ