Sales memberships

Recommending backwater valves after sewer backups

When a backwater valve is the right fix after a sewer backup, the valve types, permit and rebate basics, and what homeowners must know once it's installed.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing7 min read

On this page
  1. The moment customers ask
  2. Diagnose first
  3. When a backwater valve fits
  4. When it does not
  5. Valve types
  6. Permits, code and licensing
  7. Local grants and rebates
  8. The rule every customer must hear
  9. Maintenance belongs to the homeowner
  10. The cost of doing nothing
  11. Writing the quote
  12. A script for the post-backup visit
  13. Example: after a storm
  14. Frequently asked questions
  15. References
Sales memberships: Recommending backwater valves after sewer backupsArticle coverSALES MEMBERSHIPSRecommending backwatervalves after sewerbackupsAva for PlumbersInsightsSales memberships: Recommending backwater valves after sewer backupsArticle coverSALES MEMBERSHIPSRecommendingbackwater valvesafter sewer backupsAva for Plumbers

Key takeaways

  • A backwater valve lets sewage flow out of the house but not back in; it fits homes with fixtures below the level where the public sewer surcharges.
  • FEMA notes plumbing permits are required, the valve is part of the homeowner's lateral and it will not be maintained by the municipality[1].
  • Some communities offer grants; one Illinois village covers 50% of the cost up to $3,500[1]. Check local programs before quoting.
  • Tell every customer the critical rule: when the valve is closed, water used in the house has nowhere to go[1].

The moment customers ask

Most backwater valve conversations start in a basement that has just had sewage come up through the floor drain. The customer is upset, the cleanup is unpleasant, and they want to know how to stop it happening again. That is the moment to be most careful. A backwater valve can be exactly the right answer, or an expensive answer to the wrong problem, and the difference depends on what actually caused the backup.

The Insurance Information Institute describes a properly installed and maintained backwater valve as one that allows sewage to go out but not to come back in[2]. It also notes that the nation's more than 500,000 miles of sewer lines average over thirty years old, and that systems combining stormwater and raw sewage in one pipe are where problems arise[2]. In older neighborhoods with combined sewers, heavy rain can push the public sewer above the level of basement drains, and that is the situation a valve is built for.

Diagnose first

  • Water came up through a floor drain, lowest toilet or basement shower during heavy rain: points to the public sewer surcharging.
  • Backup happened in dry weather, or only when the household ran water: points to a blockage in the home's own lateral, such as roots or a belly.
  • Water seeped through walls or the floor slab: groundwater, which is a drainage and sump pump question, not a sewer one.
  • Neighbors had backups at the same time: strong sign of a municipal sewer problem.

A camera inspection of the lateral is usually the right first step. FEMA notes that if the home's lateral is blocked, sewage may back up into the house even when the local sewer system is flowing freely[1]. A valve will not fix a root-choked lateral; clearing or repairing it will. Offering sewer camera inspections the right way covers how to share that footage.

When a backwater valve fits

  1. The home has plumbing fixtures or drains below the level where the street sewer backs up during storms.
  2. Backups have happened during heavy rain, or the area is served by a combined sewer with a history of basement flooding.
  3. The lateral is in serviceable condition, or is being repaired at the same time.
  4. Local code allows or requires the valve, and a permit can be obtained.
  5. The household can follow the rule about not using water while the valve is closed.

When it does not

  • The backup was caused by a blockage in the home's own line. Fix the line first.
  • The water is groundwater coming through the foundation. Look at drainage and the sump system instead; see selling sump pump and battery backup upgrades.
  • Roof downspouts or footing drains connect to the sanitary lateral. FEMA stresses disconnecting downspouts from the lateral; with a valve closed, that water would back up into the house[1].
  • The customer cannot or will not maintain it. A neglected valve can stick open or closed.

Valve types

Backwater valve types described in FEMA's homeowner guidance
TypeHow it worksConsiderations
Check valveWorks automatically: a flap or other check mechanism closes when flow backs upCan be stuck open by debris; inspect and clean every few years
Gate valveManually operated; the owner closes itBetter seal and unlikely to be stuck open, but costs more and gives no protection unless someone closes it
Dual backwater valveCombines a check valve with a gate valve, usually in an exterior pitMay suit homes with repeated backflow flooding; maintenance covers both parts

FEMA's guidance describes these three types and notes that valves are typically installed in the sewer lateral outside the building, in pits with access covers, while some types can go in the basement floor near where the lateral leaves the building[1]. The plumber determines the best location and valve type for the home[1]. Explain the choice in terms of how the house is laid out, what fixtures need protecting and how the customer will reach the valve for maintenance.

Permits, code and licensing

FEMA states plainly that plumbing permits are required for backwater valve work[1]. Most states and some localities also require plumbers to be licensed[3], and many municipalities have specific rules on where valves go and whether they are required for new fixtures below the street sewer. Quote with the permit included, schedule the inspection, and give the customer a copy of the permit and the final sign-off. Customers who later sell the house will need those documents.

Local grants and rebates

Some communities with chronic basement flooding help pay for protection. FEMA's guidance gives the example of the Village of Oak Park, Illinois, whose sewer backup protection program offers eligible homeowners a grant of 50% of the cost of backup prevention improvements, up to $3,500, for an overhead sewer or backwater valve system[1]. Programs differ widely in eligibility, approved contractors, paperwork and whether work must be approved before it starts.

Keep a short list of programs in your service area, with the contact, eligibility basics and whether pre-approval is required. Mention them before you quote, not after. A customer who learns about a grant from a neighbor after paying full price will not forget who failed to mention it.

The rule every customer must hear

When the backwater valve closes, water used in the house cannot drain out. During heavy storms, avoid flushing toilets and using sinks, showers, the washer, the dishwasher and other appliances that use water[1].

FEMA's guidance makes this point and suggests signing up for local text alerts when heavy rain is forecast as a cue to stop using water[1]. Put the rule on a sticker near the valve access, in the job paperwork and in a follow-up email. A customer who runs the washer in a storm with the valve closed will flood their own basement and blame the valve.

Maintenance belongs to the homeowner

FEMA reminds homeowners that a backwater valve is part of the sewer lateral and therefore their property, and it will not be maintained by the municipality[1]. Depending on the type, homeowners may inspect and clean it every few years themselves, or need a plumber to inspect it every couple of years[1]. Offer a scheduled check and add the valve to the annual member inspection. It is a natural recurring service and protects the customer's investment.

The cost of doing nothing

Water damage is the second most common insured home loss. Over 2018 to 2022, 1.6% of insured homes had a water damage or freezing loss each year, second only to wind and hail at 2.8%[4]. Sewer backup coverage often depends on the policy and any endorsements, so suggest the customer review it with their agent rather than offering an opinion.

Share of insured US homes with a loss each year, by causeAverage 2018 to 2022.
Share of insured US homes with a loss each year, by causeBar chart. Wind and hail: 2.8%; Water damage and freezing: 1.6%.Wind and hailWind and hail: 2.8%2.8%Water damage and freezingWater damage and freezing: 1.6%1.6%Share of insured US homes with a loss each year, by causeBar chart. Wind and hail: 2.8%; Water damage and freezing: 1.6%.Wind and hailWind and hail: 2.8%2.8%Water damage and freezingWater damage and freezing: 1.6%1.6%

Source: Insurance Information Institute, 2018-2022[4]

Show the data
ItemValue
Wind and hail2.8%
Water damage and freezing1.6%

Writing the quote

A backwater valve quote should show the customer what they are buying and what comes with it. List the valve type and why it was chosen, the location and how it will be accessed, the permit and inspection, any excavation or concrete work and its restoration, and whether downspouts or other connections must be changed first. Note the maintenance plan and the no-water rule in the quote itself, so the customer reads them before agreeing.

If a grant program applies, include its steps and timing, and do not start work before any required pre-approval. Customers sometimes want the valve fitted immediately after a backup; explain when waiting a week for approval could save them a meaningful share of the cost.

A script for the post-backup visit

โ€œI'm sorry you're dealing with this. From the camera, your line is in good shape, and the water came up the floor drain while the street sewer was full. That's the situation a backwater valve is designed for. Before you decide, there are two things to know: the village has a grant that may cover part of the cost, and once it's in, you'll need to avoid running water during big storms. Want me to walk you through the options?โ€

Example: after a storm

Example (fictional): two homes on the same block call after a storm. In the first, sewage came up the floor drain while neighbors reported the same; the camera shows a sound lateral. The technician recommends a backwater valve in an exterior pit, notes the village grant, and explains the no-water rule during storms. In the second, the camera shows roots at a joint 30 feet out, and the backup happened while the laundry was running. The recommendation there is clearing and repairing the lateral; a valve would not have helped.

Frequently asked questions

What does a backwater valve do?

It allows wastewater to flow out of the building but prevents it from backing up into the building when the municipal sewer is at capacity[1].

Does a backwater valve need a permit?

FEMA's homeowner guidance says plumbing permits are required for this work[1]. Local codes also set where and how valves are installed.

Who maintains a backwater valve?

The homeowner. It is part of the sewer lateral, which is the owner's property, and the municipality will not maintain it[1].

Can I use water when the backwater valve is closed?

Avoid it. When the valve closes, water used inside cannot drain out and may back up inside the home[1].

References

  1. Federal Emergency Management Agency (2024 (revised 2025)). Urban Flooding: Guidance for Homeowners and Renters (Cook County, IL, Mitigation Assessment Team) (opens in a new tab) โ†‘

  2. Insurance Information Institute (n.d.). Protect your house from sewer backups (opens in a new tab) โ†‘

  3. U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) โ†‘

  4. Insurance Information Institute (2018-2022). Facts + Statistics: Homeowners and renters insurance (opens in a new tab) โ†‘

Book a demo

See Ava handle your calls.

Book a short demo. Weโ€™ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo