Key takeaways
- Add a truck when demand you are already losing would pay for it, not when one month is busy.
- Track four triggers: booking lead time, turned-away or unreturned calls, overtime hours and booking rate.
- Work out break-even before buying: burdened labor at about $46.89 an hour in total private-industry compensation[1], plus truck, tools and overhead.
- The tech, not the truck, is usually the constraint; about 42,000 plumber openings are projected each year[2].
- Hire ahead of the busy season: industry employment rose from 1,305,900 in January 2026 to 1,357,800 in August[3].
Too early and too late both cost money
Adding a truck is the biggest routine decision a growing plumbing company makes. Add it too early and you carry a full wage, a vehicle payment and extra insurance while the new tech waits for work. Add it too late and you lose customers to competitors, burn out the team with overtime, and let response times slip until reviews start to suffer.
Most owners decide by feel: a few weeks of being slammed and the decision seems obvious. The problem is that busy weeks come and go with weather and seasons. A better approach is to agree a short list of triggers in advance, track them every week, and act when several of them stay above your threshold for a sustained period.
The four triggers
| Trigger | How to measure it | What it tells you |
|---|---|---|
| Booking lead time | Days until the next open slot for a routine job, checked daily | Whether customers are waiting longer than they will accept |
| Turned-away and unreturned calls | Calls declined for lack of capacity plus missed calls never called back | Demand you are already losing |
| Overtime hours | Overtime as a share of total tech hours, by week | Whether the current team is stretched |
| Booking rate | Qualified calls that became booked jobs | Whether demand is real and converting, not just calls |
No single trigger is enough. Long lead times with a falling booking rate may mean customers are going elsewhere because you are slow, which a truck would fix, or that your prices or follow-up are off, which a truck would not. Overtime alone may reflect one big commercial job. The combination is what matters: long waits, lost calls, high overtime and a healthy booking rate together are a strong signal.
Count the demand you are already losing
The most persuasive evidence for another truck is work you are turning away. Ask the office to log every call declined for lack of capacity and every caller pushed out beyond a week. Then check missed calls. A missed call is often lost for good: only 19% of US adults generally pick up calls from unknown numbers[4], so a callback from your office may never be answered.
Put a rough value on the lost demand. Multiply turned-away and unreturned calls by your booking rate and average ticket. If the result over a few months would cover most of the cost of another truck, the case is strong. If not, the better first step may be fixing call handling or scheduling so the existing trucks are fuller.
Before adding a truck, make sure the trucks you have are full. Billable efficiency, routing and callbacks often free up the equivalent of part of a truck without hiring anyone.
Break-even math for a new truck
Vehicle cost
Payment or lease, insurance, fuel, maintenance and upfitting. The IRS business standard mileage rate of 76 cents a mile from July 2026[6] is a useful sense check on per-mile cost.
Tools and stock
Tool set, drain machine, camera if needed, and truck inventory, spread over their useful life.
Extra overhead
Software seats, phone, uniforms and any added office time for dispatch and billing.
Ramp-up period
New techs rarely run a full board at once. Assume lower billable hours for the first few months.
Break-even revenue
Add the monthly costs and divide by your expected gross margin. That is the revenue the truck must bring in each month to pay for itself.
Example (fictional): a shop estimates a second truck costs $11,500 a month in burdened labor, $1,900 in vehicle costs, $600 for tools and stock, and $700 in extra overhead, for $14,700 in total. With a 55% gross margin on service work, break-even revenue is about $26,700 a month. At an average ticket of $420, that is roughly 64 jobs a month, or about three a day. The owner compares that with the turned-away calls log before deciding.
Alternatives to try first
Sometimes the triggers are real but a truck is not the right answer yet, because cash is tight or no suitable tech is available. Several steps add capacity without adding a vehicle, and they are worth doing anyway because they make the next truck more profitable when it comes.
- Tighten routing so techs spend less time driving between jobs in the same day.
- Stock trucks for the most common repairs to cut supply-house trips.
- Confirm appointments the day before to reduce no-access visits.
- Move estimates and follow-up calls to the office so techs stay on billable work.
- Add a helper or apprentice to the busiest tech on large jobs to finish them sooner.
- Raise prices on the work that books out furthest, which manages demand and funds the next hire.
If these steps clear the backlog, keep tracking the triggers. If they do not, you have better evidence than ever that the next truck will be busy from the start.
Hire the person before you buy the truck
In most markets the vehicle is easy and the technician is hard. BLS projects about 42,000 openings for plumbers, pipefitters and steamfitters each year on average from 2025 to 2035[2], and construction job openings rose to 298,000 in September 2026 from 206,000 a year earlier[7]. Start recruiting before the triggers are fully met, so a good candidate is ready when you need them.
- Decide what level you are hiring: a licensed journeyman who can run calls alone, or an apprentice who rides with you first.
- Write the job description with pay range, schedule, on-call expectations and the truck they will drive.
- Ask your current techs for referrals and offer a referral bonus.
- Keep a short list of candidates even when you are not hiring.
- Plan the first month: ride-alongs, the price book, your job close-out process and customer communication.
Timing with the seasons
Industry employment follows a seasonal pattern. Plumbing, heating and air-conditioning contractors employed 1,305,900 people in January 2026 and 1,357,800 in August 2026, not seasonally adjusted[3]. Competitors hire for the busy months too, so the best candidates are often taken by early summer.
Source: U.S. Bureau of Labor Statistics, Current Employment Statistics, 2026[3]
Show the data
| Item | Value |
|---|---|
| January 2026 | 1,306 thousand employees |
| August 2026 | 1,358 thousand employees |
If your busy season is summer, start recruiting in late winter and have the new tech trained before the rush. If your peak is winter freezes and water heater failures, aim to hire in early autumn. Hiring into a slow month gives the new tech time to learn your systems before they are under pressure, as long as you can carry the cost for a few weeks.
The second truck versus the fifth
The second truck changes the owner's job most. You stop being the only tech and start being a manager, even if you still run calls. You need a written price book, a way to dispatch when you are on a job, and clear rules for how jobs are closed out and invoiced.
Around the fourth or fifth truck, the office usually becomes the bottleneck. One person cannot answer calls, dispatch, chase estimates and handle billing for five busy techs. Many shops add a dedicated dispatcher or customer service rep at this point, and the owner moves out of the field for most of the week. Plan that hire alongside the truck, not after the phones start ringing out.
Beyond that, each new truck brings management needs of its own, which our guide to scaling past ten trucks covers. Choosing your work mix shapes the decision too; see residential vs commercial plumbing.
A checklist before you commit
- Two or more triggers have stayed above your thresholds for at least a month, outside a one-off event.
- The existing trucks are running full, with reasonable billable efficiency and few callbacks.
- Break-even revenue is calculated and the lost-demand log suggests you can reach it within a few months.
- A candidate is identified, and pay and on-call terms are agreed.
- Cash reserves cover the ramp-up period without stretching the credit line.
- Insurance, licensing and software seats for the new tech are arranged.
If you are still at the planning stage, our guides to writing a business plan and going from technician to owner cover the groundwork.
Frequently asked questions
How do I know when to hire a second plumber?
When booking lead times, turned-away or unreturned calls and overtime stay high for a month or more while your booking rate stays healthy, and the lost demand would cover the cost of another truck.
How much revenue does a new plumbing truck need to break even?
Add the truck's monthly burdened labor, vehicle, tools and overhead costs, then divide by your gross margin. The result is the monthly revenue it must generate, which you can convert into jobs per day using your average ticket.
Should I hire an apprentice or a licensed plumber first?
A licensed journeyman who can run calls alone adds capacity faster. An apprentice costs less but needs supervision, so they add capacity only once trained.
When is the best time of year to hire?
Before your busy season, so the new tech is trained by the time demand peaks. Competitors hire for the same months, so start recruiting early.
References
U.S. Bureau of Labor Statistics (2026). Employer Costs for Employee Compensation - June 2026 (opens in a new tab) โ
U.S. Bureau of Labor Statistics (2025-2035). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) โ
U.S. Bureau of Labor Statistics, Current Employment Statistics (2026). All employees, plumbing, heating, and air-conditioning contractors, not seasonally adjusted (CEU2023822001) (opens in a new tab) โ
Pew Research Center (2020). Most Americans don't answer cellphone calls from unknown numbers (opens in a new tab) โ
U.S. Bureau of Labor Statistics, Current Employment Statistics (2026). Average hourly earnings of all employees, plumbing, heating, and air-conditioning contractors, not seasonally adjusted (CEU2023822003) (opens in a new tab) โ
Internal Revenue Service (2026). Standard mileage rates (opens in a new tab) โ
U.S. Bureau of Labor Statistics (2026). Job Openings and Labor Turnover Survey, Table 1: Job openings levels and rates by industry (opens in a new tab) โ