Growth service lines

Adding well pump and private well services

How a plumbing company adds well pump and private well service: market size, licensing checks, no-water triage, diagnostics, freeze calls and retesting.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing7 min read

On this page
  1. The size of the private well market
  2. Check three licensing questions before your first job
  3. The jobs a well service line brings
  4. No-water triage: treat it like a burst pipe
  5. Retesting and disinfection after every repair
  6. Freeze protection as a seasonal service
  7. Training a plumber for well work
  8. Truck stock and pricing structure
  9. Frequently asked questions
  10. References
Growth service lines: Adding well pump and private well servicesArticle coverGROWTH SERVICE LINESAdding well pump andprivate well servicesAva for PlumbersInsightsGrowth service lines: Adding well pump and private well servicesArticle coverGROWTH SERVICE LINESAdding well pump andprivate well servicesAva for Plumbers

Key takeaways

  • About 15% of Americans, more than 43 million people, rely on domestic wells, and no federal drinking water law covers that water[1].
  • Many states license well drillers and pump installers separately from plumbers, and pump wiring may fall under electrical rules; check both boards first.
  • A 'no water' call from a well owner is an emergency for that household. Triage it like a burst pipe and dispatch the same day where you can.
  • CDC tells owners to retest well water after any part of the well system is repaired or replaced, so build a lab sample into every pump job[2].
  • Freeze protection for pressure tanks and pump houses is a seasonal service you can sell before the first hard frost.

The size of the private well market

If you work outside dense city water service areas, private wells are a large share of your customers whether you advertise for them or not. More than 43 million people, about 15% of the US population, rely on domestic (private) wells, and the quality and safety of that water are not regulated by the federal Safe Drinking Water Act[1]. That means the homeowner is the water utility: they own the pump, the pressure tank, the treatment and the testing.

Share of the US population served by domestic (private) wells
Share of the US population served by domestic (private) wellsStacked bar chart. Domestic (private) wells: 15%; Public supply and other sources: 85%.Domestic (private) wells: 15% (15%)Public supply and other sources: 85% (85%)Share of the US population served by domestic (private) wellsStacked bar chart. Domestic (private) wells: 15%; Public supply and other sources: 85%.Domestic (private) wells: 15% (15%)Public supply and other sources: 85% (85%)
  • Domestic (private) wells 15%
  • Public supply and other sources 85%

Source: U.S. Geological Survey, 2026[1]

Show the data
ItemValue
Domestic (private) wells15%
Public supply and other sources85%

For a plumbing company, the well system is simply the start of the water supply you already service. A failed pressure switch, a waterlogged pressure tank or a pump that short-cycles all show up first as a plumbing complaint: low pressure, sputtering faucets, no hot water or no water at all. Owning that part of the system lets you finish the job instead of handing the customer to someone else.

Check three licensing questions before your first job

Most states and some localities require plumbers to be licensed[3], but well work often sits under a different rulebook. Many states license water well drillers and pump installers through a separate board, often the same agency that oversees groundwater. Pump wiring adds a third layer: most states require electricians to be licensed[4], and some allow a licensed pump installer to wire the pump circuit from the disconnect onward.

  1. Does your state require a pump installer license to pull, set or replace a submersible pump, or only to drill a new well?
  2. Who may wire the pump control box, pressure switch and disconnect, and is a separate electrical permit needed?
  3. Does the county health department require a disinfection and water sample after any pump work, and who submits it?

Put the answers in writing in your operations manual, by county if they differ. If your state requires a pump installer license, the quickest path is often to hire or partner with a licensed pump installer while one of your techs works toward the license. Our guide to adding electrical services covers the same partner-first approach for wiring.

The jobs a well service line brings

Common private well service calls, causes and what the crew needs
JobHow the customer describes itUsual causeCrew and gear
No water'Nothing comes out of any tap'Failed pump, tripped breaker, failed pressure switch, broken drop pipePump hoist or truck with pulling unit for deep wells, meter, spare switches
Low or surging pressure'The shower keeps pulsing'Waterlogged pressure tank, bad switch setting, clogged sediment filterTank pre-charge gauge, air compressor, switch kit
Pump runs constantly'I hear it running all the time'Leak in the line, failed check valve, worn pumpPressure test kit, leak detection
Dirty or cloudy water'It turned brown after the storm'Sediment, surface water getting in, failed well capWell cap, sample bottles, sediment filter
Freeze damage'Pipes froze in the pump house'Unheated pump house or pressure tank areaHeat tape, insulation, replacement switch and gauges

Most of these calls need no drilling equipment at all. A plumbing company can handle tanks, switches, filters, above-ground piping and shallow jet pumps with ordinary tools and a little training. Deep submersible pumps are the step that needs a pulling unit, a second person and usually the pump installer license.

No-water triage: treat it like a burst pipe

A household on a well with no water has no toilet flushing, no cooking and no showers. BLS notes that plumbers are often on call for emergencies, so evening and weekend work is common[3]; well customers are a big reason why. Give your CSRs a short script so they collect what the tech needs and catch the simple fixes.

  1. Confirm it is every tap

    'Is it every faucet in the house, inside and outside, or just one?' One fixture points to a plumbing problem, not the well.

  2. Check the breaker

    'Can you look at the breaker marked well or pump? Has it tripped?' Tell them to reset it once only; if it trips again, leave it off and wait for the tech.

  3. Read the gauge

    'Is there a pressure gauge near the tank? What number does it show?' Zero with the breaker on points to the pump or switch.

  4. Ask about recent events

    Storms, power outages, freezing nights or recent work on the well. These change the likely cause and the parts the tech brings.

  5. Set expectations

    Give a window, tell them to save water in jugs if they have it, and explain that deep pump replacement may take a second visit.

If these calls come in after hours, an SI Employee such as Ava can run the same five questions, mark the job urgent and offer the first available emergency slot, so the on-call tech gets the gauge reading and the breaker status before driving out.

Retesting and disinfection after every repair

Pulling a pump or opening the well can let bacteria in. CDC advises well owners to test at least once a year for total coliform bacteria, nitrates, total dissolved solids and pH, and to test again whenever any part of the well system is replaced or repaired[2]. Make that part of your standard job, not an upsell.

  • Follow your state or county shock-chlorination procedure after pump or drop-pipe work, and record the time and dosage on the ticket.
  • Leave sample bottles from a certified lab, or take the sample yourself after the flush period, and tell the customer when results will arrive.
  • If the result is positive for coliform, schedule the follow-up disinfection and retest before closing the job.
  • Offer a water treatment check while you are there; a UV unit or sediment filter often solves the cloudy-water complaints that brought them in. See water treatment as a business line.

Freeze protection as a seasonal service

The American Red Cross lists pipes in unheated interior areas such as basements, crawl spaces, attics and garages, and pipes exposed to severe cold, among those that freeze most often[5]. Pump houses and pressure tanks in unheated sheds fit both descriptions. The Red Cross also advises keeping the heat set no lower than 55 degrees F when away in cold weather[5].

Example: a fictional rural shop sends a September postcard and text to every well customer offering a 'pump house winter check': insulate the tank and exposed piping, check heat tape and a thermostatically controlled heater, test the pressure switch, and record the tank pre-charge. The checks are booked in October, before the first freeze, which spreads the work across a slow month and cuts the number of frozen-switch emergencies in January.

Training a plumber for well work

Most of the skill is already on your payroll. Plumbers learn through a 4- or 5-year apprenticeship[3], and the diagnostic habits they built on water heaters and pressure-reducing valves carry over to pressure tanks and switches. What they need is a structured path into the parts that are new.

  1. Week one: pressure tank basics. Pre-charge, drawdown, switch cut-in and cut-out settings, and how to read the gauge while the pump cycles.
  2. Week two: controls. Pressure switches, control boxes for three-wire pumps, constant-pressure drives, low-pressure cutoffs and how each fails.
  3. Week three: ride-alongs with a licensed pump installer on pulls and sets, including safe hoisting, wire splicing and drop-pipe handling.
  4. Week four: disinfection and sampling under your state procedure, with the tech completing the paperwork on two real jobs.
  5. Ongoing: the tech logs each well job with depth, pump model and fault found, and reviews unusual jobs with the lead installer once a month.

Pick one or two techs to specialize at first rather than training everyone. Well calls cluster around storms, freezes and power outages, and a specialist who has seen fifty failed switches will diagnose the fifty-first in minutes. As volume grows, pair that specialist with a newer tech so the knowledge does not live in one person's head.

Safety deserves its own line in the plan. Pump work mixes electricity, water and heavy lifting at the well head, so set lockout rules for the pump circuit, require a second person on deep pulls, and check that the truck's hoist or pulling unit is inspected on a schedule.

Truck stock and pricing structure

Start with the parts that solve most calls on the first visit: pressure switches in the common ranges, tank tees and gauges, check valves, a few pressure tank sizes, sediment filter housings and cartridges, well caps, and wire connectors rated for submersible use. Track which parts you run out of in the first six months and adjust.

Price well work in your price book as separate items with clear scope: diagnostics, tank replacement, switch replacement, pump pull and reset, disinfection, and lab sampling. Deep pump replacement depends on depth and pump size, so quote it after diagnosis rather than on the phone. Keep a record of each well's depth, pump model, tank size and install date; that record turns a one-off emergency into a long-term customer.

Frequently asked questions

Can a plumber replace a well pump?

In many states a plumber can service tanks, switches and above-ground piping, but pulling or setting a submersible pump may need a pump installer license from a separate state board. Check your state before you take the job.

How often should private well water be tested?

CDC recommends at least once a year for total coliform bacteria, nitrates, total dissolved solids and pH, plus after any repair, flooding or change in taste, color or smell[2].

What causes no water from a well after a storm?

Common causes are a tripped breaker, a pressure switch damaged by a power surge, or a failed pump. Have the customer check the breaker and gauge before the tech drives out.

Is well service worth adding for a city plumbing company?

Only if a real share of your service area is on private wells. Pull your customer addresses and check how many are outside the public water system before investing in a pulling unit.

References

  1. U.S. Geological Survey (2026). Domestic (Private) Supply Wells (opens in a new tab) โ†‘

  2. Centers for Disease Control and Prevention (2026). Guidelines for Testing Well Water (opens in a new tab) โ†‘

  3. U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) โ†‘

  4. U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Electricians (opens in a new tab) โ†‘

  5. American Red Cross (2026). Frozen Pipes (opens in a new tab) โ†‘

Book a demo

See Ava handle your calls.

Book a short demo. Weโ€™ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo