Key takeaways
- Most plumbing, heating and AC establishments are small: about 58% had fewer than 5 employees in 2023, and many run from homes and garages[1].
- Move when wasted labor costs more than rent: average hourly earnings at plumbing, heating and AC contractors reached $42.38 in September 2026[2].
- Check zoning and home-occupation rules early; commercial vehicles, stored materials and employees arriving each morning often break them.
- Lease terms matter as much as rent: total occupancy cost, term, personal guarantee, build-out and room to grow.
- Lay the space out around truck restocking, not the office.
The usual path from garage to warehouse
Most plumbing companies start small and stay small for a while. In 2023, 64,871 of 111,207 plumbing, heating and air-conditioning contractor establishments, about 58%, had fewer than 5 employees[1]. Many of them run from a home office and a garage, with a storage unit for overflow stock. That is a sensible way to start: low fixed costs while you prove demand.
The usual stages look like this: home and garage, then a storage unit or a shared contractor yard, then a small flex or light-industrial unit with a roll-up door and an office, then a larger warehouse with room for several trucks to load at once. Each step adds fixed cost, so each should be triggered by a clear problem the current space causes.
Triggers that say it is time
- Techs spend the first hour of the day at the supply house because there is nowhere to stock common parts.
- Inventory is spread across garages and truck beds, and nobody knows what you own.
- Water heaters and fixtures for scheduled jobs have no secure place to wait.
- You are hiring office staff, and the kitchen table is no longer an office.
- Neighbors, an HOA or the city have complained about trucks or deliveries.
- Your insurer or landlord asks where materials and vehicles are kept overnight.
- You want to run training, ride-along debriefs or team meetings and have no room.
Any one of these can be managed for a while. Three or more at once usually mean the space is costing more in lost time and risk than a lease would.
Do the labor math before the rent math
Owners often compare a lease with zero, because the garage feels free. The real comparison is with the labor hours you lose without a proper shop. BLS notes that some plumbers travel to worksites every day[3], and every unplanned supply run adds to that drive time. Average hourly earnings for all employees at plumbing, heating and air-conditioning contractors were $42.38 in September 2026, up from $40.59 a year earlier[2].
Source: U.S. Bureau of Labor Statistics, Current Employment Statistics, 2026[2]
Show the data
| Period | Value |
|---|---|
| Jan 2025 | $39.3 |
| Sep 2025 | $40.59 |
| Aug 2026 | $42.65 |
| Sep 2026 | $42.38 |
Example: a fictional five-tech shop estimates that each tech loses about 45 minutes a day to supply house runs and hunting for parts across two garages. That is close to 19 hours of paid time a week across the team, before counting lost billable work. At the BLS industry average hourly earnings above, wages alone for those hours come to about $800 a week, and the billable time lost is worth more. The owner uses that figure, not zero, as the baseline when comparing lease options.
Revenue per person is the other side of the equation. Census data show plumbing, heating and air-conditioning contractors generated about $260,000 in receipts per employee in 2022[4]. If a shop lets each tech complete even one more job a week, that productivity gain often covers a modest lease. Run the numbers with your own average ticket and margin before deciding.
Zoning and home-occupation rules
Zoning is where many moves go wrong, in both directions. Running a growing contractor business from home can break home-occupation rules long before anyone complains, and leasing a unit in the wrong zone can stop you from using it as planned. Check with the local planning or zoning office before you sign anything.
| Question | Why it matters |
|---|---|
| Does the home-occupation ordinance allow employees to report to the property? | Many limit non-resident employees or customer visits |
| Are commercial vehicles allowed to park overnight in the residential zone? | Box trucks, trailers and lettered vans are often restricted |
| Which zones allow a contractor shop or contractor's yard? | Some flex or retail-zoned units do not allow outdoor storage or vehicle fleets |
| Is a certificate of occupancy needed for your use? | A change of use may need inspections, fire separation or parking upgrades |
| What can be stored on site? | Propane cylinders, solvents and adhesives may trigger fire code rules |
| Are signs, outdoor storage and truck wash areas allowed? | Rules differ by zone and by landlord |
Get the zoning confirmation in writing and make the lease contingent on your intended use being allowed. A landlord's verbal assurance is not a permit.
Lease terms to negotiate
Industrial and flex leases are often written for the landlord's benefit, and small contractors sign them quickly. Read the whole document and compare total occupancy cost, not just base rent.
- Lease type: in a net lease you may pay taxes, insurance and common area maintenance on top of rent. Ask for the last two years of those charges.
- Term and options: a shorter first term with renewal options protects you if growth is slower than planned.
- Expansion rights: a right of first refusal on the next unit can save a second move.
- Build-out: who pays for an office, restroom upgrades, shelving anchors, electrical for a compressor or a mezzanine.
- Personal guarantee: try to cap it, limit it to a period, or offer a larger deposit instead.
- Access: 24-hour access for early starts and emergency calls, and enough parking for trucks and staff vehicles.
- Use clause: wide enough to cover storage, light fabrication and training.
Lease or buy?
Once a company has been in leased space for a few years, owners often ask whether to buy a building instead. Owning can lock in occupancy costs, build equity and give full control over layout and signs. It also ties up cash that the business may need for trucks, hiring or an acquisition, and makes a later move slower and more expensive.
- Buy when the business is stable, the location will suit you for many years, and you have cash or financing that does not starve operations.
- Lease when growth is uncertain, you may expand into a new area, or you would rather put capital into trucks, people and marketing.
- Consider holding the property in a separate entity from the operating company, with a market-rate lease between them. Ask your accountant and attorney how that affects taxes, liability and a future sale of the business.
- Check what a buyer of your company would want. Some buyers prefer to lease the building from you after a sale; others want neither the building nor its mortgage.
Whichever route you choose, write down the space you expect to need in three years: trucks, staff, inventory and training. A building that fits today but cannot handle the next five hires turns into another move sooner than you planned. Ask about neighboring units, yard space and parking before you commit, and keep a simple floor plan that shows where the next racks, desks and truck bays would go.
Lay the space out around the trucks
The shop exists to get trucks out fully stocked and on time. Design it around the morning load-out, not around the owner's office.
Restock zone
Put the most-used parts near the roll-up door, binned and labeled by truck stock list, so techs restock in minutes at the end of the day.
Staging area
Set aside floor space for water heaters, fixtures and special-order parts tagged by job and date.
Will-call and returns
Keep a shelf for supply house deliveries and returns, with a log, so nothing sits unclaimed for weeks.
Safety
Store gas cylinders and chemicals as the fire code and labels require, keep aisles clear and post first aid and spill supplies. Specialty trade contractors had 2.3 recordable injury and illness cases per 100 full-time workers in 2024[5].
Office and training
A small office for dispatch and a room for meetings and training. A bench with common fixtures and valves lets new techs practice.
Track inventory from the first day in the new space. A simple count of truck stock and shelf stock each month, matched against purchases, shows shrinkage and overbuying quickly.
Timing the move
Move in your slowest season if you can, and give yourself a few weeks of overlap with the old space. Tell customers and supply houses your new address, update your licenses, insurance, vehicle registrations and business listings, and keep the phone numbers the same.
A shop often follows other growth steps: a second service area, covered in opening a second location, or an acquisition, covered in acquiring smaller plumbing shops. It also changes the owner's day; see owner time management and org charts for plumbing companies for how roles shift once the business has a building of its own.
Frequently asked questions
When should a plumbing company get a shop?
When the current setup costs more in lost labor and risk than a lease would: daily supply runs, scattered inventory, no secure staging, office staff without an office, or zoning complaints.
Can I run a plumbing business from my house?
Many owners do at first, but home-occupation rules often limit employees reporting to the property, commercial vehicles and stored materials. Check your local ordinance.
What kind of space do plumbing contractors lease?
Usually a flex or light-industrial unit with a roll-up door, some office space, truck parking and a zone that allows contractor use and storage.
How do I compare a lease with working from home?
Compare it with the labor time you lose without a shop, not with zero. Average hourly earnings at plumbing, heating and AC contractors were $42.38 in September 2026[2].
References
U.S. Census Bureau (2023). County Business Patterns 2023, U.S. national file (cbp23us) (opens in a new tab) โ
U.S. Bureau of Labor Statistics, Current Employment Statistics (2026). Average hourly earnings of all employees, plumbing, heating, and air-conditioning contractors, not seasonally adjusted (CEU2023822003) (opens in a new tab) โ
U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) โ
U.S. Census Bureau (2022). Statistics of U.S. Businesses 2022: U.S. and states, 6-digit NAICS (opens in a new tab) โ
U.S. Bureau of Labor Statistics (2024). Industries at a Glance: Specialty Trade Contractors (NAICS 238) (opens in a new tab) โ