Key takeaways
- A virtual receptionist bill is coverage hours times call volume times call length, run through a pricing unit; size each input from your own call log.
- Rounding and transfer time can move the billable minutes by 18% in the worked example, more than a small difference in the headline rate.
- Per minute, in-house time looks cheap; per hour of coverage it does not, because scattered calls at lunch, evenings and weekends need paid shifts.
- Count the costs outside the rate: setup, re-keying messages into your software, callbacks and weekly review.
What you are actually buying
Virtual receptionist quotes arrive as a rate per minute or per call, but what a plumbing shop buys is coverage: particular hours of the week, a set of jobs done on each call, and a promise about what happens to urgent ones. Get those three things straight and the rate becomes much easier to judge.
Hours: overflow while your CSR is on another line, lunch, evenings, weekends, or all day. Tasks: a message, a booked job, a transfer to the on-call tech, a Spanish-speaking caller handled from start to finish. Volume: how many calls land in those hours and how long they run. Every quote is some mix of those three, priced through one of a handful of units.
Most shops making this decision are small. About 59% of plumbing, heating and air-conditioning firms with employees had fewer than five people in 2022[2], so the comparison is usually against one office person, or the owner's spouse, not a call center. Contract mechanics, billing increments and fee lists are covered in how answering services charge. This article is about the inputs that set the bill: your calls, their length and the in-house cost you are comparing against.
The pricing units you will meet
| Pricing unit | How the bill grows | What to check in a plumbing shop |
|---|---|---|
| Per minute | With total talk time, rounded to the billing increment | Long emergency calls and transfer attempts |
| Per call | With the number of calls answered | Whether spam, hang-ups and wrong numbers count |
| Monthly bundle | Flat up to an allowance, then an overage rate | Freeze weeks and storm days blowing past the allowance |
| Per booking or per lead | With jobs booked or leads passed on | Who decides what counts as a lead |
| Dedicated remote hours | With the hours a named person is on shift | Paying for idle time on a quiet Tuesday |
Per-minute pricing rewards short calls and punishes long ones. Per-call pricing does the opposite: a shop whose calls run long, with streets spelled out, shutoff walkthroughs and transfers, often comes out ahead paying per call. Bundles suit steady volume, and plumbing volume is not steady. Employment at plumbing, heating and air-conditioning contractors ran about 4% higher in August 2026 than in January[3], and a single hard freeze can bunch a week of emergencies into one day. Dedicated remote hours make sense only when a block of the day is busy enough to keep a person occupied.
Call length is the number that moves the bill
Two shops with the same call count can get very different bills, because plumbing calls vary so much in length. A customer confirming tomorrow's arrival window is done in a minute. A caller with water under the kitchen sink takes several: name, address, the street spelled out, the ZIP code check, what is leaking, whether the water is off, the callback number and the read-back.
- Address capture and read-back, especially new developments, unit numbers and gate codes.
- Service-area checks for callers on the edge of the ZIP codes you cover.
- Shutoff walkthroughs on active leaks.
- Transfer attempts to the on-call tech, and the wait while each number rings.
- Price questions: the service-call fee, the after-hours fee, a ballpark for a water heater.
- Callers who switch to Spanish or another language partway through.
- Repeat callers checking when the tech will arrive.
Your phone system already knows your average. Most call reports show talk time per call. Export four weeks of inbound calls, drop anything under ten seconds, and average the rest by time of day. That average, not a provider's industry estimate, is what belongs in the quote.
Size the month from your own call log
- Your team
- System
01Your team
Export four weeks of calls
Inbound only, with time, duration and whether the call was answered.
02Your team
Strip spam and wrong numbers
Count them separately: some quotes bill them, some do not.
03Your team
Mark the hours to cover
Overflow, lunch, evenings, weekends: only calls in those hours go out.
04System
Average talk time per band
Daytime overflow and night calls run to different lengths; keep them apart.
05Your team
Add transfer and hold time
Night calls that ring the on-call tech carry extra billable minutes.
06Your team
Price one month per quote
Same calls, same minutes, every fee included, side by side.
Example process. Four weeks gives a usable average; repeat it in your busiest season.
If four weeks of history is all you have, adjust for the season you are in. Plumbing call volume forecasting shows how to scale a quiet month up to a winter one, which is the month the overage clause will be tested.
Worked Example: a five-truck shop
Example: Ridgeline Plumbing, a fictional five-truck shop, has one CSR on the phones from 8 to 5 on weekdays. She answers about 45 calls a day and misses roughly one in five while she is on another line or at lunch. After 5 pm and at weekends the line goes to the owner's cell, about 25 calls a week.
Example: the owner wants an outside service to take the weekday overflow and everything after hours. The call log shows about 195 overflow calls a month averaging 3.2 minutes, and about 108 after-hours calls averaging 4.5 minutes, longer because more of them are emergencies with a transfer attempt. Together that is about 303 calls and 1,110 minutes of talk time.
| Billing approach | Billable units in the example month | Why it differs |
|---|---|---|
| Per second, talk time only | About 1,110 minutes | The baseline from the call log |
| Rounded up to the full minute | About 1,260 minutes | Each call rounds up by about half a minute on average |
| Full minutes plus transfer time | About 1,310 minutes | Ringing the on-call tech on 30% of night calls adds about 1.5 minutes each |
| Per call, answered calls only | About 303 calls | Length stops mattering |
| Per call, spam and wrong numbers billed | About 327 calls | In this example 8% of calls are spam or wrong numbers |
Example: the gap between the first and third lines is 18%, before a single fee. Rounding and transfer time decide more of this bill than a few cents on the headline rate, which is why each quote should be priced against a table like this one rather than a sales estimate of your volume.
Example: now run the same shop through a hard-freeze week. If after-hours calls double for those seven days and run a minute longer because more of them are burst pipes, the month gains roughly 25 calls and 160 minutes. On a bundle sized for an ordinary month, all of that lands on the overage rate. Ask each provider to price both months, the ordinary one and the freeze, before you compare.
Minutes versus hours: the in-house comparison
The usual comparison is a second receptionist or CSR. The median receptionist at plumbing, heating and air-conditioning contractors earned $20.35 an hour in May 2025, and the median CSR $22.22[4][5]. Wages are only part of the cost. For private-industry office and administrative support workers, total compensation averaged $36.73 per hour worked in June 2026, of which $25.22 was wages and salaries[1].
- Wages and salaries $25.22 69%
- Insurance $4.05 11%
- Paid leave $2.77 8%
- Legally required benefits $2.58 7%
- Supplemental pay $1.06 3%
- Retirement and savings $1.05 3%
Source: U.S. Bureau of Labor Statistics, 2026[1]
Show the data
| Item | Value |
|---|---|
| Wages and salaries | $25.22 |
| Insurance | $4.05 |
| Paid leave | $2.77 |
| Legally required benefits | $2.58 |
| Supplemental pay | $1.06 |
| Retirement and savings | $1.05 |
| Input | Example |
|---|---|
| Calls a day sent out | 14 |
| Minutes per call, talk plus write-up | 4.5 |
| Share the service would take (%) | 100% |
| Loaded receptionist cost per hour | $29.62 |
| Calls a month | 304 |
| Staff hours on these calls | 23 |
| Hours handed off | 23 |
| Monthly value of that staff time | $675 |
How it is worked out: Calls a day ร 21.7 working days ร minutes per call รท 60 ร share handled = hours; hours ร hourly cost.
Assumptions
- Receptionists at plumbing, heating and air-conditioning contractors earned a median $20.35 an hour in May 2025.[4]
- Benefits were 31.3% of compensation for private-industry office and administrative support workers, which loads $20.35 to about $29.62 an hour.[1]
- Calls a day and minutes per call come from the fictional Ridgeline example: about 303 calls a month spread over 21.7 working days.
Example figures. This prices the minutes only; it does not include the hours someone would have to be on shift.
Example: priced by the minute, the in-house time for those calls is small, about 23 hours a month, or roughly $675 at the loaded receptionist rate. That is the figure a per-minute quote appears to be competing with, and next to it many quotes look expensive.
But nobody can hire 23 hours scattered across lunch breaks, 7 pm on a Tuesday and Sunday morning. To answer those calls in-house you pay for the hours they might arrive in. Example: covering weekday evenings from 5 to 9 and Saturdays from 8 to 4 is 28 hours a week, about 121 hours a month, or roughly $3,590 at the same loaded rate, before any overtime and still with nobody on Sundays or overnight.
The person you hire will also be away some of the time. In March 2026, private-industry workers averaged 11 paid vacation days after a year of service and 7 paid sick days[6], and in an average week of 2025, 3.9% of full-time office and administrative support workers had an absence[7]. Someone covers those days too. The wider hiring comparison is in in-house CSR vs answering service.
Costs that sit outside the rate
The invoice is not the whole cost of an outside receptionist. Budget for the time your own people spend around it.
- Setup: writing the script, the service area, the fees you share and the on-call order. Plan on several hours of the owner's time, plus changes in the first month.
- Re-keying: if jobs arrive as emailed messages, someone types each one into the field software. Time it per call.
- Callbacks: every call that ends as a message rather than a booking means a second call from your office later, to someone who may not pick up.
- Review: reading a sample of messages each week to catch wrong addresses and missed urgency.
- Changes: new fees, new ZIP codes, a different tech on call. Ask how fast changes go live and whether they are billed.
Then put the same questions to every provider, so the quotes describe the same service:
- Will you price our exported call log as it stands, spam and wrong numbers included, rather than your estimate of it?
- Which tasks happen on every call: address read-back, the service-area check, Spanish, booking into our schedule?
- What happens to calls over the allowance in a freeze: answered at the overage rate, or sent somewhere else?
- Can coverage hours change month to month as the season does, without a penalty?
- How do jobs reach us, and in a form our office does not have to retype?
Re-keying is the line owners most often underestimate. A service that only takes messages can look cheap per minute and still cost an hour a day at your desk. The answering service checklist has the questions that expose it before you sign.
Where an SI Employee fits the comparison
An SI Employee changes what you compare, not how. It answers forwarded calls in your business name during overflow, after hours or all day, takes the job details and reads them back, sends urgent calls down the on-call path you set, books routine work into one tested schedule or leaves a request for the office to confirm, and switches to Spanish when the caller does. Each call lands in your inbox as a summary with the recording and transcript. Put it through the same exercise as every other option: same hours, same tasks, same month of calls.
A quote only means something once you know what each option does on a burst-pipe call at 10 pm, so listen before you put numbers side by side. The commercial contractor example shows a larger desk with an answering service on nights, and the product overview lists what is live today.
Frequently asked questions
How much does a virtual receptionist cost a plumbing company?
The rate times your billable units, plus fees, so it depends on how many calls you send and how long they run. Size it from your own call log, then compare it with an in-house office worker, who cost private employers $36.73 per hour worked in wages and benefits in June 2026[1].
Is per-minute or per-call pricing better for plumbers?
Per-call pricing usually favors shops with long calls: emergencies, transfers, detailed addresses. Per-minute pricing favors short, routine calls. Price one month of your own calls both ways before choosing.
How many minutes will a five-truck shop use?
In the worked example above, about 303 calls a month came to roughly 1,110 to 1,310 billable minutes depending on rounding and transfer time. Your own call log will give a better figure than any estimate.
Is a virtual receptionist cheaper than hiring a second CSR?
For scattered hours such as lunch, evenings and weekends, usually, because a hire is paid for whole shifts. For a block of the day busy enough to keep one person working, a hire can win, especially one who also books and dispatches.
Do after-hours calls cost more?
On many quotes, yes: night, weekend and holiday surcharges are common. Those calls also tend to run longer when they involve a transfer to the on-call tech, so check both the rate and the minutes.
References
U.S. Bureau of Labor Statistics (2026). Employer Costs for Employee Compensation, Table 4: Private industry workers by occupational and industry group (June 2026) (opens in a new tab) โ
U.S. Census Bureau (2022). Statistics of U.S. Businesses 2022: U.S. and states, 6-digit NAICS (opens in a new tab) โ
U.S. Bureau of Labor Statistics, Current Employment Statistics (2026). All employees, plumbing, heating, and air-conditioning contractors, not seasonally adjusted (CEU2023822001) (opens in a new tab) โ
U.S. Bureau of Labor Statistics (Public Data API) (2025). Occupational Employment and Wage Statistics, May 2025: receptionists and information clerks, plumbing, heating and air-conditioning contractors, median hourly wage (opens in a new tab) โ
U.S. Bureau of Labor Statistics (Public Data API) (2025). Occupational Employment and Wage Statistics, May 2025: customer service representatives, plumbing, heating and air-conditioning contractors, median hourly wage (opens in a new tab) โ
U.S. Bureau of Labor Statistics (2026). Paid leave benefits: Average number of sick and vacation days by length of service requirement (March 2026) (opens in a new tab) โ
U.S. Bureau of Labor Statistics (2025). Labor Force Statistics from the CPS, Table 47: Absences from work of employed full-time wage and salary workers by occupation and industry (opens in a new tab) โ