Licensing compliance

Paid sick leave laws for plumbing employers

How state paid sick leave laws differ on accrual, caps, carryover and waiting periods, what they mean for techs and CSRs, and how to cover the phones.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing8 min read

On this page
  1. One shop, two sick leave policies
  2. Four state laws side by side
  3. Accrual math for a real schedule
  4. Writing one policy for the whole crew
  5. When a technician calls in sick
  6. Covering the phones when the CSR calls in sick
  7. Payroll setup checklist
  8. Frequently asked questions
  9. References
LICENSING COMPLIANCEPaid sick leave laws forplumbing employers75%of private workers at sites with 1 to 49 people had paid sickleave in 2026, against 91% at 500+Ava for PlumbersInsightsLICENSING COMPLIANCEPaid sick leave lawsfor plumbingemployers75%of private workers at sites with 1 to49 people had paid sick leave in 2026,against 91% at 500+Ava for Plumbers
Figure source: U.S. Bureau of Labor Statistics, 2026[1]

Key takeaways

  • There is no federal paid sick leave requirement for private employers; state and local laws set the rules[2].
  • Accrual rates, annual caps, carryover and waiting periods all differ by state, so a crew that works across a state line can need two policies[3][4][5][6].
  • Part-time and seasonal staff are covered in Washington, and only 59% of part-time private workers nationally have paid sick leave[5][1].
  • Plan phone coverage before the CSR calls in sick, not on the morning it happens.

One shop, two sick leave policies

A plumbing company with trucks in two states can owe two different sick leave policies to two technicians doing the same job. One accrues an hour for every 30 hours on the clock, the other an hour for every 40. One can be capped at 24 hours a year, the other cannot be capped below 40. Payroll software handles the arithmetic once it is set up correctly; the problem is that many small shops set it up once, years ago, for one state.

Federal law does not settle it for you. The Labor Department says there are currently no federal legal requirements for paid sick leave; the FMLA requires up to 12 weeks of unpaid leave for certain medical situations at covered employers[2]. Everything else comes from state, county and city laws, and the list keeps growing.

Small employers are where the gap shows. In March 2026, 81% of private-industry workers had access to paid sick leave[7], but the figure was 75% at establishments with 1 to 49 workers and 91% at those with 500 or more[1]. Access was 71% in construction, extraction, farming, fishing and forestry occupations and 88% in office and administrative support[1]. In a typical plumbing shop, the field crew and the office often sit on opposite sides of that line.

Private-sector workers with paid sick leave, by size of workplaceShare of private-industry workers with access to paid sick leave, March 2026.
Private-sector workers with paid sick leave, by size of workplaceColumn chart. 1 to 49 workers: 75%; 50 to 99 workers: 73%; 100 to 499 workers: 87%; 500 or more: 91%.0%25%50%75%100%1 to 49 workers: 75%75%1 to 49 workers50 to 99 workers: 73%73%50 to 99 workers100 to 499 workers: 87%87%100 to 499 workers500 or more: 91%91%500 or morePrivate-sector workers with paid sick leave, by size of workplaceColumn chart. 1 to 49 workers: 75%; 50 to 99 workers: 73%; 100 to 499 workers: 87%; 500 or more: 91%.0%25%50%75%100%1 to 49 workers: 75%75%1 to 49workers50 to 99 workers: 73%73%50 to 99workers100 to 499 workers: 87%87%100 to499workers500 or more: 91%91%500 ormore

Source: U.S. Bureau of Labor Statistics, 2026[1]

Show the data
Establishment sizeWorkers with access
1 to 49 workers75%
50 to 99 workers73%
100 to 499 workers87%
500 or more91%

Four state laws side by side

StateAccrualAnnual amountCarryover and capsWaiting period
California1 hour per 30 hours worked, or front-load 40 hours or 5 days[3]Use may be capped at 40 hours or 5 days a year[3]Carries over; balance may be capped at 80 hours or 10 days[3]Up to 90 days for new hires[3]
New York1 hour per 30 hours worked[4]56 hours paid with 100+ employees; 40 paid with 5 to 99; 40 with 0 to 4, paid only if net income exceeds $1 million[4]Set by the employer within the annual amountAccrual began September 30, 2020[4]
Washington1 hour per 40 hours worked, whatever the employment status[5]No annual use cap stated[5]Balances of 40 hours or less carry over[5]90 calendar days[5]
Arizona1 hour per 30 hours worked[6]40 hours with 15+ employees; 24 hours with fewer than 15[6]Carries over, or pay out and front-load the next year[6]Employer may require 90 days[6]

Look at how different the same shop looks in each column. A 12-person company owes 40 paid hours in New York and in Arizona, but in Arizona it drops to 24 if headcount falls below 15[4][6]. Washington's accrual is slower, an hour per 40, yet it sets no annual use cap and covers part-time, temporary and seasonal workers in the same way as full-time staff[5]. California lets you choose between accrual and a front-loaded 40 hours or five days[3].

Those four are examples, not a complete list. Other states, and cities such as New York City, Chicago and San Francisco, run their own laws with different numbers, and your obligations follow where employees actually work. If your techs cross a state line for jobs, ask your payroll provider how hours worked in each state are tracked before you assume one policy covers everyone.

Accrual math for a real schedule

Plumbing techs rarely work a clean 40. Long weeks in a freeze, on-call nights and Saturday installs push hours up, and in an accrual state every hour worked earns leave. Run the numbers for a typical tech before you set the policy, so caps and balances do not surprise anyone in March.

Example: one technician averaging 45 hours a week for a year
  • 78 hours

    accrued in California at 1 per 30; you may cap use at 40 a year[3]

  • 58.5 hours

    accrued in Washington at 1 per 40, with no annual use cap stated[5]

  • 40 hours

    most a New York shop with 5 to 99 employees must provide[4]

  • 24 hours

    most an Arizona shop with fewer than 15 employees must allow[6]

Example: 45 hours ร— 52 weeks = 2,340 hours worked. Divide by the state's accrual rate, then apply the state's cap.

Example: in California, 2,340 hours at one hour per 30 accrues 78 hours. The employer may cap use at 40 hours or five days a year and the balance at 80 hours or ten days[3], so by the second year this tech will hit the balance cap and stop accruing until some leave is used. Some shops front-load 40 hours each January instead and skip the tracking. Either approach is allowed in California[3]; pick one and write it down.

Example: in Washington, the same tech accrues 58.5 hours, and up to 40 unused hours carry into next year[5]. Because there is no annual use cap stated, a tech with a full carried-over balance can use more than a year's accrual. Budget the coverage for that, especially for your most senior people.

Writing one policy for the whole crew

Most multi-state shops write one policy that meets the most generous state they operate in and apply it everywhere. It costs a little more and saves a great deal of administration. Whatever you choose, the written policy should answer these questions in plain words.

  • Accrual or front-loaded? Which hours count, and on which pay date the balance updates.
  • What year? Calendar year, anniversary year or another 12-month period, used consistently.
  • Caps: annual use, total balance, carryover, with the state limits shown next to yours.
  • Waiting period for new hires, where the state allows one[3][5][6].
  • How to call in: the number to ring, by what time, and who takes the message before 7 am.
  • How the on-call rotation works when the on-call tech is sick, and who picks up the shift.
  • Smallest increment of use, such as an hour or half a day, within what your state permits.
  • Payout at separation: whether unused sick leave is paid out when someone leaves. Decide it separately from vacation, which some states treat differently.

Put it in the employee handbook next to vacation rules, and keep the two separate so busy-season limits on vacation do not bleed into sick leave. Managing technician vacation requests in peak season covers the vacation side; benefits a small plumbing company can afford covers what to add beyond the legal minimum.

Part-time office staff deserve a specific line. Nationally, 88% of full-time but only 59% of part-time private workers had paid sick leave in March 2026[1], and many plumbing offices rely on part-time CSRs for evenings and Saturdays. In Washington, accrual applies regardless of full-time, part-time, temporary or seasonal status[5], so the Saturday CSR and the summer helper earn leave too.

When a technician calls in sick

A sick tech leaves a day of booked jobs without a truck. The office has three choices for each one: move it to another tech, move it to another day, or keep the appointment with a shorter job list. The decision is quicker if the dispatcher sorts the day by urgency first: active leaks and no-water calls stay, drain cleanings and estimates can usually move.

Call the customers who are moving before they start watching the clock, and offer a specific new window rather than an apology. The call is short when it has a script.

Example script: โ€œHi, this is Dana at Riverbend Plumbing about your appointment today. Your technician is out sick, so we've moved you to tomorrow between 8 and 10, or Thursday afternoon if that suits better. If anything gets worse before then, call us on this number and we'll get someone out.โ€

Note who was rescheduled on the job record. If the same customer ends up moved twice in a season, a manager should make the next call. And if the sick tech was on call, the rotation needs a named replacement the same morning, because emergencies do not wait for the schedule to settle.

Covering the phones when the CSR calls in sick

A tech out sick means one truck short. A CSR out sick means nobody answers, and in a small shop that hurts more. The worst version is the 6:40 am call-in on a Monday after a cold weekend, with the overnight messages still to clear and the dispatcher already on the radio. Decide the coverage plan now, while everyone is healthy.

Example: the morning the only CSR calls in sick
  • Your team
  • SI Employee
  • System
  1. 01Your team

    Call-in logged

    The CSR rings the manager at 6:40; the absence is recorded as sick time.

  2. 02Your team

    Forwarding switched

    The office line goes from overflow-only to all-day forwarding for the shift.

  3. 03SI Employee

    Calls answered

    Business-name greeting; address, ZIP, problem and callback read back.

  4. 04SI Employee

    Urgent jobs routed

    Burst pipes follow the on-call path: on-call tech, backup, then a message.

  5. 05System

    Summaries to dispatch

    Each call emailed with recording and transcript; urgent ones marked urgent.

  6. 06Your team

    Requests confirmed

    The dispatcher confirms routine bookings in the schedule by mid-morning.

Example sequence. The forwarding change takes a minute if it is written into the sick-day checklist.

If you already forward overflow to an SI Employee, the sick-day change is one setting: forward all day for that shift. Callers hear your business name, the job details are taken down and read back, urgent jobs follow the on-call path you approved, and every call lands in the inbox with a recording and a summary (try a call). The 8-truck residential example models a shop taking about 330 calls a week, which shows how fast a single empty desk turns into a backlog.

Whatever you use, write the plan on one page: who covers which hours, how forwarding is switched, where messages go and who confirms bookings. Cross-training a dispatcher or office manager on the booking script helps too; hiring and training plumbing CSRs covers what to teach, and running a remote CSR team covers cover from home. Our separate guide to covering CSR vacations and sick days goes through rotas in detail.

Payroll setup checklist

  1. Map every work location

    List the states, counties and cities where each employee actually works, not just where the shop is.

  2. Pick accrual or front-load

    Set it per state in payroll, using the most generous rule if you run one policy for everyone.

  3. Count every hour

    Make sure overtime, on-call callouts and Saturday shifts feed the accrual where the state counts all hours worked.

  4. Set caps and carryover

    Enter each state's limits, then test with a long-week employee like the 45-hour example above.

  5. Show the balance

    Print available sick leave on pay stubs or in the employee portal so nobody has to ask the office.

  6. Keep the records

    Hours worked, leave accrued and used, by employee and pay period, with your other payroll records.

How long to keep those records varies by law; what records a plumbing business must keep sets out the federal baseline. Recheck the setup each January, when many state and local rules change.

Frequently asked questions

Is there a federal paid sick leave law for private plumbing companies?

No. The Labor Department says there are currently no federal legal requirements for paid sick leave; the FMLA covers unpaid leave at covered employers[2]. State and local laws set paid sick leave rules.

Do part-time CSRs and seasonal helpers earn sick leave?

In Washington, yes, regardless of full-time, part-time, temporary or seasonal status[5]. California, New York and Arizona base accrual on hours worked[3][4][6], so part-timers accrue at the same rate per hour.

Can new hires be made to wait before using sick leave?

Often, within limits. California and Washington allow up to 90 days[3][5], and Arizona employers may require new hires to wait until the 90th calendar day[6].

Can we give everyone a block of hours on January 1 instead of tracking accrual?

California allows front-loading at least 40 hours or five days a year[3], and Arizona lets employers pay out unused time at year end and front-load the next year[6]. Check that the block meets your state's minimum.

Does unused sick leave roll over?

Usually some of it. Washington carries over balances of 40 hours or less[5], Arizona carries over unless you pay out and front-load[6], and California carries over subject to any cap you set[3].

References

  1. U.S. Bureau of Labor Statistics (2026). Employee Benefits in the United States, March 2026: Table 6. Selected paid leave benefits: Access (opens in a new tab) โ†‘

  2. U.S. Department of Labor (2026). Sick Leave (opens in a new tab) โ†‘

  3. California Department of Industrial Relations, Labor Commissioner's Office (2026). California Paid Sick Leave: Frequently Asked Questions (opens in a new tab) โ†‘

  4. New York State (2026). New York Paid Sick Leave (opens in a new tab) โ†‘

  5. Washington State Department of Labor & Industries (2026). Paid Sick Leave (opens in a new tab) โ†‘

  6. Arizona State Legislature (2026). Arizona Revised Statutes 23-372: Accrual of earned paid sick time (opens in a new tab) โ†‘

  7. U.S. Bureau of Labor Statistics (2026). Employee Benefits in the United States โ€” March 2026 (opens in a new tab) โ†‘

Book a demo

See Ava handle your calls.

Book a short demo. Weโ€™ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo