Key takeaways
- A written on-call policy settles the arguments before they start: who is eligible, how the rotation works, what it pays and what happens when a call is missed.
- Check the pay section against federal rules first: on-call time on the employer's premises is work time, on-call at home usually is not, and overtime is due over 40 hours[1].
- Tie eligibility to licensing and experience; most states and some localities require plumbers to be licensed[2].
- Include rest rules and a right to refuse unsafe entry, and review the whole policy every year with the team.
What the policy is for
Plumbers are often on call for emergencies, so evening and weekend work is common[3]. In many shops the rules for on-call live in the owner's head: who covers which nights, what standby pays, how fast a tech should answer, whether the truck can be used for personal errands. That works until someone feels the rotation is unfair or a call goes unanswered. A written policy gives everyone the same rules and gives the owner something to point to.
The template below is a starting point, section by section, with example wording you can adapt. It is not legal advice. Have it checked against your state's wage and hour rules, any union agreement and your insurance before you issue it.
Before you write: the legal checks
Three rule sets shape the policy. First, federal wage law. The Department of Labor says an employee required to remain on call on the employer's premises is working while on call, while one who must stay on call at home, or can leave a message where they can be reached, is in most cases not working; additional constraints on the employee's freedom can make the time compensable. Covered employees must also get at least one and a half times their regular rate for hours over 40 in a week[1].
Second, state law, which may set daily overtime, minimum call-out pay or rest rules. Third, collective agreements. In 2025, 11.1% of employed construction wage and salary workers were union members[4], and a union contract may already set on-call terms that your policy must follow.
Section 1: purpose and scope
Template wording: “This policy explains how [company] provides emergency plumbing service outside normal business hours of [hours]. It applies to all field employees who are eligible for the on-call rotation and to the managers who support them.”
Section 2: eligibility
- Holds the license your state or locality requires for the work they will do alone at night. Most states and some localities require plumbers to be licensed[2].
- Has completed a set period of daytime service work, such as six months, including emergency calls.
- Has completed on-call training: the night scripts, safety rules, payment steps and the dispatch app.
- Has a valid driver's license and is approved under the company's vehicle insurance.
- Apprentices may join the rotation only as a second person, paired with an eligible tech.
Section 3: rotation, swaps and holidays
Rotation
On-call runs in weekly blocks from [day and time] to [day and time]. The schedule is published at least [number] weeks ahead.
Backup
Each block has a named primary and a named backup. The backup is paid standby and must be reachable.
Swaps
Employees may swap blocks with another eligible employee. Swaps are approved by the service manager and recorded in the schedule before they start.
Holidays
Holiday cover is assigned through the annual holiday bid described in the holiday plan.
Limits
No employee is scheduled for more than [number] on-call weeks in a row or [number] in a rolling quarter, unless they ask to be.
For the holiday bid itself, see holiday on-call coverage plan.
Section 4: pay
Spell out each part separately: standby pay for being available, pay for time worked on calls, any minimum call-out period, the overtime rule and any holiday premium. Use your actual wage scale as the base. For context, US plumbers' hourly wages in 2025 ranged from $21.22 at the lowest tenth to $52.13 at the highest tenth, with a median of $30.67[5].
Source: O*NET OnLine (U.S. Department of Labor), BLS 2025 wage data, 2025[5]
Show the data
| Percentile | Hourly wage (USD) |
|---|---|
| Lowest 10% | $21.22 |
| Median | $30.67 |
| Highest 10% | $52.13 |
Template wording: “Employees on standby receive [standby amount] per [day or week]. Time worked on a call is paid from dispatch until return home, with a minimum of [number] hours per call-out, at the employee’s regular rate or overtime rate as the law requires. Holiday on-call shifts receive an additional [premium].”
When you set standby and call-out amounts, remember that wages are not the whole cost of an on-call hour. Benefits made up 30.0% of private-industry employer compensation costs in June 2026[6]. Budget for the full cost so the policy does not have to be cut back the first time the numbers are checked.
Section 5: response times
- Acknowledge an urgent alert within [number] minutes by call or reply.
- Leave for an urgent job within [number] minutes of acknowledging, after the payment step.
- Stay within [drive time] of the night service area during on-call hours.
- Keep the on-call phone charged, with sound on and do-not-disturb bypass set for the alert number.
- Avoid alcohol and anything else that impairs driving or judgment during on-call hours.
Set the numbers so that the company's published response promise is achievable, as worked through in setting a realistic emergency response time promise.
Section 6: vehicles and equipment
- The on-call vehicle is stocked to the on-call checklist and restocked at handover.
- Personal use of the vehicle during on-call hours is [allowed within limits or not allowed]; family members may not ride along.
- Fuel is kept above half a tank.
- The on-call phone, payment device and safety kit are checked at the start of each block.
Section 7: safety and the right to refuse
Template wording: “Any employee may decline to enter, or may leave, a site they judge to be unsafe. No employee will lose pay, shifts or standing for doing so. The employee informs the on-call manager, and the company follows up with the customer.”
Add the check-in routine, payment rules and two-person jobs from night call safety rules for plumbing technicians.
Section 8: rest after night calls
State how late work affects the next day. A simple rule: an employee who worked a call that ended after midnight starts the next day [number] hours later, or later still by agreement with the manager, with no loss of scheduled pay. Rest rules protect safety and also reduce mistakes on the next morning's jobs.
Section 9: missed calls and discipline
| Issue | First time | Second time in 12 months | Third time |
|---|---|---|---|
| Missed acknowledgment, backup covered | Conversation and note | Written warning | Removal from rotation for a period |
| Missed acknowledgment, nobody covered | Written warning | Final warning | Removal from rotation |
| Unapproved swap or absence | Written warning | Final warning | Removal from rotation |
| Impaired while on call | Removal from rotation and review under company policy | Not applicable | Not applicable |
Always look at the cause before applying the table. A phone that was on silent because of a software update is different from a tech who ignored the alert. Review every missed call the next morning, in private.
Section 10: review
Review the policy every year with the field team, and after any serious incident. Look at missed calls, call-outs per block, how the rotation was shared and the after-hours numbers from does after-hours service actually pay. Record the version and date on the policy and have each employee sign that they have read the current version.
Example: a fictional six-tech shop adopts this template with weekly blocks, a named backup, a two-hour minimum call-out and a late-start rule after midnight calls. In the first quarter, the review shows two missed acknowledgments, both caused by do-not-disturb settings. The shop adds a phone check to the handover and has no misses in the next quarter.
Rolling the policy out
- Share a draft with the techs who already take on-call and ask what is missing or unfair.
- Fix the draft, then have it checked against state law, any union agreement and your vehicle insurance.
- Walk the whole team through it in a meeting, section by section, and answer questions.
- Start it at the beginning of a pay period, so standby and call-out pay are calculated the new way from day one.
- Review the first month's on-call blocks with each tech and adjust anything that does not work in practice.
A policy written with the people who do the work tends to be followed. One handed down without discussion tends to be worked around, usually at 2 a.m.
Frequently asked questions
Do plumbers have to be paid for on-call time?
Under federal rules, on-call time on the employer's premises is work time; on-call time at home, where the employee can be reached, usually is not, unless the restrictions are heavy. Time spent on calls is work time. State law and union agreements may add requirements.
What should an on-call policy include?
Purpose and scope, eligibility, rotation and swaps, pay, response times, vehicle and equipment rules, safety and the right to refuse, rest after night calls, discipline for missed calls and an annual review.
Can apprentices be on call?
Usually only as a second person paired with a licensed tech. The person responsible for the work should hold the license your state requires.
How should missed on-call alerts be handled?
Look at the cause first, then apply a clear progressive scale, from a conversation to removal from the rotation for repeated misses.
References
U.S. Department of Labor, Wage and Hour Division (2026). Fact Sheet #22: Hours Worked Under the Fair Labor Standards Act (FLSA) (opens in a new tab) ↑
U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) ↑
U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) ↑
U.S. Bureau of Labor Statistics (2025). Union Members, Table 3: Union affiliation of employed wage and salary workers by occupation and industry (opens in a new tab) ↑
O*NET OnLine (U.S. Department of Labor), BLS 2025 wage data (2025). National Wages 47-2152.00 - Plumbers, Pipefitters, and Steamfitters (opens in a new tab) ↑
U.S. Bureau of Labor Statistics (2026). Employer Costs for Employee Compensation - June 2026 (opens in a new tab) ↑