Key takeaways
- Most on-call pay plans combine three pieces: a standby amount for being available, pay for time worked on callouts, and a minimum paid time per callout.
- Benchmark against real wages: the median plumber earned $30.67 an hour in 2025, with the middle of the range spanning roughly $21 to $52 from the lowest to the highest tenth[1][2].
- Under the FLSA, waiting at home on call is usually not work time, but restrictions on the tech's freedom can change that[3].
- Callout time, including emergency travel from home, counts as hours worked and feeds into overtime at time and a half over 40 hours[4][5].
- Techs judge fairness by predictability and by what a bad night pays, not by the standby rate alone.
What on-call pay has to cover
On-call asks two different things of a tech. The first is availability: staying sober, near the truck and within reach of the service area, and keeping the phone on all night. The second is the work itself when a page comes in: getting up, driving out and fixing the problem. Good pay plans pay for both. Plans that only pay for callouts make quiet weeks feel unpaid; plans that only pay standby make heavy weeks feel exploitative.
Start with what your techs earn during the day. In May 2025 the median plumber, pipefitter and steamfitter earned $30.67 an hour[1]. Hourly wages ranged from $21.22 for the lowest-paid tenth to $52.13 for the highest-paid[2]. Across all employees of plumbing, heating and AC contractors, average hourly earnings were $42.38 in September 2026 (preliminary)[6].
Source: O*NET OnLine (U.S. Department of Labor), BLS 2025 wage data, 2025[2]
Show the data
| Item | Value |
|---|---|
| Lowest 10% | $21.22 |
| Median | $30.67 |
| Highest 10% | $52.13 |
The three common models
| Model | How it works | Techs like | Watch out for |
|---|---|---|---|
| Standby stipend | Flat amount per on-call day, night or week | Predictable income for being available | Too low and nobody volunteers; does not reward heavy nights |
| Pay per callout | Hourly pay for time worked, sometimes with a flat callout bonus | Heavy weeks pay well | Quiet weeks pay nothing for a restricted life |
| Minimum-hour guarantee | Each callout pays at least a set number of hours | A 20-minute fix at 2 am still pays properly | Must still track actual hours for overtime |
Most shops combine them: a modest standby amount, hourly pay for callout time with a minimum per callout, and overtime where hours go over 40 in the week. Some add a share of the revenue from night jobs, which aligns the tech with doing the work well but can tempt upselling, so pair it with a clear pricing policy.
What the FLSA says, in short
Federal wage-and-hour rules shape what you must pay; your plan sits on top of them. The Department of Labor says an employee required to remain on call on the employer's premises is working, while one required to remain on call at home, or allowed to leave a message where they can be reached, is in most cases not working. It adds that additional constraints on the employee's freedom could require the time to be paid[3].
- Callout time is work time. Once the tech starts working on the emergency, the time counts.
- Emergency travel counts too. Federal regulations say that when an employee who has gone home is called out at night to travel a substantial distance for an emergency job, all of that travel time is working time[4].
- Overtime applies over 40 hours in a workweek at not less than time and one-half the regular rate[5].
- The FLSA does not itself require extra pay for weekend or holiday work; any premium for those is your policy, not a federal rule[5].
- State law can be stricter. Several states have their own rules on daily overtime, reporting-time pay and on-call; check yours.
This is general information, not legal advice. Have a wage-and-hour adviser review your on-call policy, especially if you restrict response times tightly or pay standby in ways that affect the regular rate used for overtime.
How tight rules change the picture
The tighter the leash, the more on-call looks like work. A rule that the tech must acknowledge a page within five minutes and be on site within thirty, with frequent callouts, restricts freedom far more than a rule to return calls within half an hour. Under the Department of Labor's guidance, those constraints can tip waiting time toward compensable time[3]. That is a legal reason to keep response rules no tighter than you really need, and a practical reason as well: restrictive on-call is what drives techs to refuse it.
What techs consider fair
- A standby amount that makes a quiet week worth giving up evenings for.
- A minimum per callout, so a short job at 2 am is not paid as twenty minutes.
- Pay that starts when they leave home, not when they arrive.
- A holiday premium for on-call on major holidays.
- Rest after late callouts that does not cost them their next day's pay.
- The same rules for everyone, written down, with no favorites.
- Fewer pointless pages: screening that keeps non-emergencies until morning.
The last point is often worth more than a raise. A tech who is woken twice a week for real emergencies and paid well for it will usually stay on the rotation. One who is woken five times for running toilets will not, whatever the rate.
Account for the full cost
Wages are not the whole cost of an on-call plan. In June 2026, benefits averaged 30.0% of private-industry employer compensation costs, with wages the other 70.0%[7]. Payroll taxes, workers' compensation and vehicle costs rise with callout hours. Price your after-hours service with the full cost in mind, so the rotation pays for itself instead of quietly draining margin.
Example: one week under two plans
Example (fictional amounts): A tech earning a fictional base rate of $34 an hour is on call for a week and gets three callouts: 1.5 hours, 0.5 hours and 2 hours, including travel from home. Under Plan A, the shop pays only for time worked: 4 hours. Under Plan B, it pays a flat weekly standby amount, plus a two-hour minimum per callout, so the three callouts pay 2, 2 and 2 hours. Plan B costs the shop more, but the tech is paid for the 0.5-hour night like a real callout. If the week's total hours go over 40, the actual hours worked go into the overtime calculation either way, at the rate your adviser confirms.
Run this comparison on your own callout log for a busy month and a quiet month. The plan that looks cheap in a quiet month can be the expensive one in January, and the reverse.
Mistakes that cause disputes
Most arguments about on-call pay come from a handful of avoidable gaps between what the owner meant and what the tech experienced. Check your plan against this list.
- Paying from arrival on site instead of from leaving home, which leaves emergency travel unpaid.
- Rounding short callouts down, so a 25-minute fix is paid as nothing extra.
- Not recording phone triage time when the tech talks a customer through a shut-off at 1 am and decides not to go out.
- Treating standby pay as a substitute for overtime instead of adding the hours worked into the weekly total.
- Changing the rates mid-season without notice, especially just before winter.
- Paying different amounts to different techs for the same rotation without a written reason such as license level.
- Letting the office page the tech for non-emergencies, so the plan pays for calls that should have waited.
Fix these in writing and most disputes disappear. Keep the callout log as the single source for pay, with page time, acknowledge time, departure time and finish time on every entry, so pay is calculated from the same record every month.
Designing your plan step by step
Pull the callout log
For the last six to twelve months, count callouts per week and their length, including travel.
Set the response rules
Decide the acknowledge time and on-site target you really need, keeping them as loose as the work allows.
Pick the model
Standby plus callout pay with a minimum suits most shops. Decide each amount against your day rates.
Check the law
Have a wage-and-hour adviser check the plan against federal and state rules, including how standby affects the regular rate.
Ask the techs
Show the draft to the people on the rotation before you finalize it. Their objections are usually about the minimum and the rest rules.
Review twice a year
Compare actual callouts with the assumptions and adjust before winter.
Reduce the pages, not just the pay
The cheapest way to make on-call fair is to reduce how often it is used for jobs that could wait. A written triage policy, applied by whoever answers your phones at night, keeps dripping faucets and slow drains for the morning and saves the tech's sleep for burst pipes and sewage backups. Pair it with a backup tech for overlapping emergencies, and the rotation becomes something people are willing to do.
Frequently asked questions
Do I have to pay plumbers for being on call?
Under federal rules, waiting at home on call is usually not work time, but tight restrictions on the tech's freedom can make it compensable[3]. Time spent on callouts is work time. Check your state's rules too.
What is a fair standby amount?
One that makes a quiet week worth the restrictions. Benchmark it against your techs' hourly rate and the number of evenings they give up, and ask the techs before you set it.
Does travel to a night emergency count as hours worked?
Federal regulations say that when an employee is called out at night from home to travel a substantial distance for an emergency job, all that travel time is working time[4].
Do I have to pay extra for weekend or holiday on-call?
The FLSA does not require a weekend or holiday premium, only overtime over 40 hours in a workweek[5]. Many shops pay a holiday premium anyway to keep the rotation fair.
References
U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) โ
O*NET OnLine (U.S. Department of Labor), BLS 2025 wage data (2025). National Wages 47-2152.00 - Plumbers, Pipefitters, and Steamfitters (opens in a new tab) โ
U.S. Department of Labor, Wage and Hour Division (2026). Fact Sheet #22: Hours Worked Under the Fair Labor Standards Act (FLSA) (opens in a new tab) โ
Legal Information Institute, Cornell Law School (2026). 29 CFR 785.36 - Home to work in emergency situations (opens in a new tab) โ
U.S. Department of Labor, Wage and Hour Division (2026). Fact Sheet #23: Overtime Pay Requirements of the FLSA (opens in a new tab) โ
U.S. Bureau of Labor Statistics, Current Employment Statistics (2026). Average hourly earnings of all employees, plumbing, heating, and air-conditioning contractors, not seasonally adjusted (CEU2023822003) (opens in a new tab) โ
U.S. Bureau of Labor Statistics (2026). Employer Costs for Employee Compensation - June 2026 (opens in a new tab) โ