Key takeaways
- US on-highway diesel averaged $6.292 a gallon in the week of November 2, 2026, up $2.539 from a year earlier; regular gasoline was $4.153, up $1.134.
- Calculate fuel cost per job, not per month, so you can see which jobs and zones lose money when prices jump.
- If you add a surcharge, tie it to a public index such as the EIA weekly regional price, with a baseline, steps and a review date.
- Disclose any surcharge before the work, in the quote and on the phone, and drop it when prices fall.
- Routing, service zones and better truck stock cut miles, and miles are the part of fuel cost you control.
What fuel prices look like right now
Plumbing is a driving business. Many plumbers travel to worksites every day[1], and every service call starts with a truck on the road. In the week of November 2, 2026, the US average retail price of on-highway diesel was $6.292 a gallon, $2.539 higher than a year earlier, and regular gasoline averaged $4.153, up $1.134[2]. That is an increase of roughly two-thirds for diesel and over a third for gasoline in twelve months.
| Fuel | Week of Nov 2, 2026 | A year earlier | Change |
|---|---|---|---|
| Regular gasoline (US average) | $4.153 | $3.019 | +$1.134 (about +38%) |
| On-highway diesel (US average) | $6.292 | $3.753 | +$2.539 (about +68%) |
Prices vary a lot by region. Diesel ranged from $5.912 on the Gulf Coast to $7.272 on the West Coast and $8.076 in California in the same week[2]. A national rule of thumb is no use if your trucks fill up in Sacramento.
Source: U.S. Energy Information Administration, 2026[2]
Show the data
| Item | Value |
|---|---|
| Gulf Coast | $5.91 |
| East Coast | $6.03 |
| US average | $6.29 |
| Midwest | $6.4 |
| Rocky Mountain | $6.45 |
| West Coast | $7.27 |
| California | $8.08 |
The IRS business standard mileage rate, which bundles fuel with other vehicle costs, moved too: 70 cents a mile in 2025, 72.5 cents for the first half of 2026 and 76 cents from July 1, 2026[3]. A mid-year change of that kind is unusual and is a sign of how much vehicle costs have moved.
For comparison, average hourly earnings at plumbing, heating and AC contractors rose about 4.4% over the year to September 2026[4]. Fuel has moved far faster than labor, which is why it deserves its own line in the budget and its own review rhythm rather than being folded into an annual price rise.
Work out fuel cost per job
Monthly fuel bills hide the real problem. A shop can be fine on average while long-distance calls or small jobs in outlying zones lose money. Calculate fuel per job instead.
Get miles per truck
Use fuel card data, GPS records or odometer logs to find each truck's miles per week.
Get real fuel economy
Divide miles by gallons bought for each truck. Loaded service vans often do much worse than the brochure figure.
Calculate fuel cost per mile
Divide this week's local price per gallon by each truck's miles per gallon.
Find miles per job
Divide weekly miles by jobs completed, or better, use routing data to get miles for each job type and zone.
Multiply
Fuel cost per job equals miles per job times fuel cost per mile. Compare it with the trip charge or the travel time built into your price.
Example: a fictional diesel service truck gets 12 miles per gallon and drives 22 miles per job on average. At a local diesel price of $6.40, fuel costs about 53 cents a mile and about $11.70 per job. A year ago, at about $3.80, the same job used about $7.00 of fuel. Across 1,000 jobs a year per truck, that is a difference of roughly $4,800 per truck.
Three ways to recover fuel costs
- Build it into rates: raise the labor rate or flat-rate prices once, with fuel at a realistic level. Simple for customers, but slow to react if prices swing again.
- Use a trip or service call charge: a fixed charge per visit covers travel. Easy to explain, but does not separate fuel from other travel costs.
- Add a fuel surcharge: a separate, temporary line that moves with a published index. Transparent and reversible, but customers notice it and it needs a written policy.
Many shops combine the first two and keep a surcharge for spikes. Whichever you choose, the price customers hear on the phone must match the invoice. Surprise fees create complaints and bad reviews faster than honest price rises.
Designing a surcharge policy
Pick the index
Use the EIA weekly retail price for your region, published each week, rather than your own pump receipts. A public index is easy to explain and hard to dispute.
Set a baseline
Choose the fuel price already built into your rates. No surcharge applies at or below the baseline.
Set steps
Add a small fixed amount per visit for each step above the baseline, such as each 50 cents a gallon. Steps are simpler than a percentage of the invoice.
Set the review rhythm
Check the index on the same day each week or month and change the surcharge only on that day.
Set a sunset
Commit in writing that the surcharge falls when the index falls, and review the baseline at least once a year when you reprice.
Disclose it
Mention the surcharge on the phone when booking, on quotes and on the invoice, and explain it on your website.
Example step table for a fictional shop with a $4.50 diesel baseline: $4.51 to $5.00, a $3 per visit surcharge; $5.01 to $5.50, $6; $5.51 to $6.00, $9; $6.01 to $6.50, $12; above $6.50, review rates instead of adding more steps. Check local and state rules on how fees must be disclosed before relying on any surcharge.
What to say to customers
A booking script: Our visit includes a fuel surcharge of [amount] this week, because fuel prices are well above normal. It's based on the government's weekly fuel price for our region, and we take it off when prices come down. Would you like to go ahead and book the visit?
For maintenance agreement members, consider waiving the surcharge as a member benefit. It costs little per visit and gives members a concrete reason to renew.
Burn less fuel
Price recovery only covers part of the gap. The rest comes from driving fewer miles for the same work.
- Book by zone: group routine calls by area and day, and keep emergency capacity spread across the map.
- Use routing in your field service software and let dispatch see each truck's location before assigning the next job.
- Stock trucks to finish jobs on the first visit. Every supply-house run and return trip is fuel the customer does not pay for.
- Set an idling policy, especially in winter, when engines are left running to keep cabs warm.
- Keep tires inflated to spec and service vehicles on schedule; both affect fuel economy.
- Review your service area: if outlying zones produce few jobs and long drives, set a higher trip charge there or a minimum job size.
Track fuel per job monthly next to average ticket. If fuel per job rises faster than ticket size, either the pricing or the routing needs attention.
Gasoline or diesel for the next truck
A price gap this wide makes fuel type part of the next vehicle decision. Diesel has long been the choice for heavy box trucks and for vans that tow jetters or carry heavy loads, because of torque and engine life. With diesel well above gasoline in every region this year, the case for diesel on a light service van is weaker than it was.
- Compare total cost per mile, not fuel price alone: fuel, maintenance, expected engine life and resale value.
- Use your own fuel card data for real fuel economy on each vehicle type in your fleet.
- Match the vehicle to the job mix. A van that mostly runs short service calls in town does not need the same drivetrain as a truck that tows a trailer jetter.
- If you are considering electric or hybrid service vans, start with one vehicle on predictable in-town routes and measure it for a full year, including winter.
- Revisit the decision each time you replace a vehicle; fuel prices and vehicle options both change quickly.
Seasonal planning
Fuel use moves with the seasons. Winter brings more idling, slower roads and longer routes around closures; summer can bring longer service days and more air conditioning in the cab. Build next year's fuel budget by month from this year's fuel card data rather than spreading a yearly figure evenly, and add a contingency range for price swings. For the vehicle side of the budget, see fleet cost per vehicle, and for winter driving, snow, ice and job access policies.
Frequently asked questions
Should plumbers charge a fuel surcharge?
It can be fair during price spikes if it is tied to a public index, disclosed before the work and removed when prices fall. Many shops prefer to build normal fuel costs into rates and keep a surcharge only for spikes.
How do I calculate a fuel surcharge?
Pick a public index such as the EIA weekly regional price, set the baseline already in your rates, and add a fixed amount per visit for each step above it, such as each 50 cents a gallon.
What does fuel cost per plumbing job?
It depends on miles per job, the truck's real fuel economy and local prices. Multiply miles per job by local price divided by miles per gallon; many shops are surprised how much it varies by zone.
Is the IRS mileage rate a good guide for fuel costs?
It covers all vehicle operating costs, not just fuel, so it is useful for reimbursing personal vehicles but not for setting a fuel surcharge.
References
U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) โ
U.S. Energy Information Administration (2026). Gasoline and Diesel Fuel Update (opens in a new tab) โ
Internal Revenue Service (2026). Standard mileage rates (opens in a new tab) โ
U.S. Bureau of Labor Statistics, Current Employment Statistics (2026). Average hourly earnings of all employees, plumbing, heating, and air-conditioning contractors (CEU2023822003) (opens in a new tab) โ