Dispatch scheduling

Dispatching for first-time fix: load the right truck

Raise first-time fix on plumbing calls with intake questions by call type, customer photos, house-age checks and parts staged before the truck rolls.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing7 min read

On this page
  1. What first-time fix means
  2. Why a second trip costs so much
  3. Intake questions by call type
  4. When the caller does not know the answer
  5. Ask for photos
  6. Check the age of the house
  7. Stage parts before the truck rolls
  8. Match the tech to the job
  9. Example: one water heater, two outcomes
  10. What to measure
  11. Log every return trip
  12. Frequently asked questions
  13. References
Dispatch scheduling: Dispatching for first-time fix: load the right truckArticle coverDISPATCH SCHEDULINGDispatching forfirst-time fix: loadthe right truckAva for PlumbersInsightsDispatch scheduling: Dispatching for first-time fix: load the right truckArticle coverDISPATCH SCHEDULINGDispatching forfirst-time fix: loadthe right truckAva for Plumbers

Key takeaways

  • First-time fix is decided at intake and in the warehouse, not only on site.
  • A short question set per call type tells dispatch which tech, which parts and how much time.
  • Customer photos of the fixture, the label and the shut-off remove most guesswork; 91% of US adults own a smartphone[1].
  • Log every return trip with a reason code and review the codes weekly.

What first-time fix means

A job is a first-time fix when the problem is solved on the first visit, with no second trip for parts, a second tech, a different tool or a fresh diagnosis. Measure it as completed-on-first-visit jobs divided by all service jobs that were fixable that day. Exclude jobs where the customer chose to wait for a quote or to order a specific fixture; those are planned second visits, not failures.

Track it by job type and by tech. A shop-wide figure hides the real story, which is usually that two or three job types, such as water heaters, specialty faucets and older-home drain work, produce most of the return trips.

Why a second trip costs so much

A return trip repeats the drive, the setup and the customer conversation without adding revenue. The labor it consumes is expensive: average hourly earnings at plumbing, heating and AC contractors were $42.38 in September 2026 (preliminary)[2], and employer costs run higher than wages alone. Across private industry, benefits were 30.0% of compensation costs in June 2026[3].

What an hour of private-industry labor costs employersEmployer costs for employee compensation, June 2026.
What an hour of private-industry labor costs employersStacked bar chart. Wages and salaries: 70%; Benefits: 30%.Wages and salaries: 70% (70%)Benefits: 30% (30%)What an hour of private-industry labor costs employersStacked bar chart. Wages and salaries: 70%; Benefits: 30%.Wages and salaries: 70% (70%)Benefits: 30% (30%)
  • Wages and salaries 70%
  • Benefits 30%

Source: U.S. Bureau of Labor Statistics, 2026[3]

Show the data
ComponentShare of compensation (%)
Wages and salaries70%
Benefits30%

It also eats capacity that could hold a paying job. Plumbing, heating and AC contractors generated about $260,000 in receipts per employee in 2022[4]; every truck-hour spent on a repeat visit is an hour not contributing to that. And customers notice. A second visit for a part the office could have predicted is the kind of thing that ends up in a review.

Intake questions by call type

The CSR's questions should map directly to what the truck needs. Keep each set short, three to five questions, and make the answers fields in the job record rather than free text.

Example: intake question sets that drive truck loading
Call typeQuestions to askWhat it tells dispatch
Water heaterGas or electric? Tank or tankless? Size on the label? Where is it: garage, closet, attic? Any water on the floor?Which unit and parts to stage, one or two techs, whether a permit is needed
ToiletRunning, leaking at the base or clogged? Brand on the inside of the tank? One toilet or several?Flapper or fill valve kit, wax ring, or a drain call in disguise
FaucetKitchen, bath or tub? Dripping, leaking underneath or no water? Brand if known? Want repair or replacement?Cartridge or full fixture, whether the customer has bought one
DrainWhich fixtures are slow? More than one? Basement floor drain involved? Cleanout location?Sink machine or main line machine, camera time
LeakWhere is the water showing? Is it constant or only when a fixture runs? Main shut off yet?Emergency priority, leak-locate equipment, ceiling access
Garbage disposalHums, does not turn on or leaks? Brand and horsepower if visible?Reset and clear, or replacement unit

Have the CSR read the answers back. A caller who says 'gas, 50 gallons, in the garage' and hears it repeated will often correct themselves: 'actually it might be 40'. That correction saves a trip.

When the caller does not know the answer

Many callers cannot say whether their water heater is gas or electric, and that is fine. The CSR's job is to make it easy to find out without sounding like a test. A few phrasings help:

  • 'Is there a small flame or a pipe going up through the ceiling from the top of the tank? That usually means gas.'
  • 'On the side of the tank there's a sticker with a model number. If you can read me the first few letters or send a photo, that's perfect.'
  • 'Is the faucet a single handle or two handles? Any name printed on it?'
  • 'Does the water back up in just the one sink, or do you also hear gurgling in the toilet or tub?'
  • 'No problem if you're not sure. I'll note it, and our tech will bring the most likely parts.'

Record 'unknown' as a real answer, not a blank. Unknown answers on high-risk job types are the jobs a lead tech should review the afternoon before, and they are good candidates for a photo request.

Ask for photos

Photos answer questions customers cannot. Most can take one easily: Pew reports 91% of US adults own a smartphone[1]. Make the request part of booking for the job types where photos change the outcome.

  1. Send the request at booking

    Text a link or reply number right after the call: 'To help us bring the right parts, please reply with photos of the items below.'

  2. Ask for specific shots

    The whole fixture or unit; the label or model plate; the shut-off valves; the area around it, so the tech can judge access.

  3. Attach photos to the job

    Make sure they show up in the tech's app and on the dispatch board, not just in someone's text inbox.

  4. Review before the morning

    Dispatch or a lead tech scans photos for tomorrow's jobs the afternoon before and adjusts parts or tech assignment.

  5. Close the loop

    If a photo changes the plan, such as a tankless unit when the caller said tank, tell the customer what will change.

Check the age of the house

Older homes are where predictions fail: odd pipe sizes, galvanized lines that crumble when touched, shut-offs that do not shut off. EPA notes lead pipes are more likely in older cities and in homes built before 1986[5]. Ask for the approximate year the home was built, or look it up from public property records, and flag older homes in the job record.

For flagged homes, stage the extras that older plumbing tends to demand: transition fittings, a few common replacement shut-off valves, extra supply lines and the tools for seized connections. Allow more time as well. A water heater swap in a house with original galvanized piping is rarely the same job as one in a ten-year-old house.

Stage parts before the truck rolls

  • Build a standard truck stock list by job type, and audit it weekly against what techs actually used.
  • Pull job-specific parts the afternoon before and stage them in labeled bins by truck, so morning loading is quick.
  • For water heaters, reserve the unit in the warehouse when the job is booked and check it again the evening before.
  • Keep a short list of the parts that most often cause return trips and carry two of each.
  • Record supply house runs as a reason code; frequent runs for the same part mean the stock list is wrong.

The truck stock list deserves its own review cycle; the guide to on-call vehicle and truck stock covers that in more depth.

Match the tech to the job

Parts are only half of it. A newer tech sent to a complex job may lack the experience to finish, and the job returns with a senior tech the next day. Use the intake answers to set a minimum skill level for each job type and let dispatch override only with a reason. When a newer tech is sent to stretch their skills, plan for phone backup from a lead rather than a second visit.

Example: one water heater, two outcomes

Example (fictional): a customer calls about no hot water. The CSR records 'gas, tank, garage' and books a standard swap. The tech arrives to find a 50-gallon power-vent unit in a closet with a vent run that needs new materials. The truck has a standard atmospheric 40. Two return trips and a frustrated customer follow.

Example, same call with the process: the CSR asks for photos of the label and the vent. The customer sends them in ten minutes. The lead tech reviewing tomorrow's jobs spots the power-vent model, reserves the right unit, adds vent materials and assigns a second person for the lift. The job is done on the first visit, in one long morning.

What to measure

  • First-time fix rate by job type and by tech, monthly.
  • Share of jobs with photos attached before the visit, and first-time fix with and without photos.
  • Return trips by reason code, weekly.
  • Supply house runs per tech per week.
  • Intake answers recorded as unknown, by CSR, as a coaching signal.

Log every return trip

Give techs a short list of reason codes and make one required whenever a job is marked incomplete: part not on truck, wrong part staged, needed second tech, needed special tool, diagnosis changed, customer not ready, waiting on approval. Review the codes weekly in the dispatch meeting. Recurring codes point to a specific fix: a new intake question, a stock list change or a skill threshold.

Return trips caused by the fix itself failing are a different problem, covered in reducing callbacks and recalls. Keep the two lists separate so neither hides the other.

Frequently asked questions

What is a good first-time fix rate for plumbers?

There is no reliable public benchmark for plumbing, so set your own baseline by job type and track the trend. Focus on the job types that cause most return trips rather than the shop-wide figure.

Which intake questions matter most for first-time fix?

The ones that decide parts and skill: fuel type, size and location for water heaters, fixture brand for faucets and toilets, how many drains are affected for clogs, and where the water is showing for leaks.

Should we ask customers to send photos before the visit?

Yes, for job types where a photo changes the parts or the tech you send. Ask for the whole unit, the label, the shut-offs and the surrounding area, and make sure photos reach the tech's app.

How do I stop supply house runs?

Record each run as a reason code, review them weekly and adjust the standard truck stock list. Stage job-specific parts the afternoon before.

References

  1. Pew Research Center (2026). Mobile Fact Sheet (opens in a new tab) โ†‘

  2. U.S. Bureau of Labor Statistics, Current Employment Statistics (2026). Average hourly earnings of all employees, plumbing, heating, and air-conditioning contractors, not seasonally adjusted (CEU2023822003) (opens in a new tab) โ†‘

  3. U.S. Bureau of Labor Statistics (2026). Employer Costs for Employee Compensation - June 2026 (opens in a new tab) โ†‘

  4. U.S. Census Bureau (2022). Statistics of U.S. Businesses 2022: U.S. and states, 6-digit NAICS (opens in a new tab) โ†‘

  5. U.S. Environmental Protection Agency (2026). Basic Information about Lead in Drinking Water (opens in a new tab) โ†‘

Book a demo

See Ava handle your calls.

Book a short demo. Weโ€™ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo